Cart 2 india

Specification
Brand : MK Morse
BulletPoint1 : Patent Pending tooth set design optimized to remove material faster
BulletPoint2 : New cap reduces runout and vibration
BulletPoint3 : New side slot increased leverage for faster, easier slug removal
BulletPoint4 : New exterior red coating reduces side wall friction for efficient cutting
BulletPoint5 : Heavy duty .050 side wall for greater stability
Color : Multi
Color1 : Silver
Color2 : Black
Color3 : Red
CompatibleDevices1 : Drilling Machine
CompatibleDevices2 : Lathe
CompatibleDevices3 : Milling Machine
CompatibleDevices4 : Grinding Machine
CompatibleMaterial : Metal
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Wood
CompatibleMaterial3 : Plastic
CompatibleMaterial4 : Alloy Steel
CompatibleMaterial5 : Wood
CompatibleMaterial6 : Aluminum
Configuration : Pop_A_Plate
CustomerPackageType : 1
ExternallyAssignedProductIdentifier : 8011509734503
ExternallyAssignedProductIdentifier1 : 050326177177
ExternallyAssignedProductIdentifier2 : 0050326177177
ExternallyAssignedProductIdentifier3 : 00050326177177
FinishType : Beige
GpsrSafetyAttestation : 1
IncludedComponents : 1-hole saw
IncludedComponents1 : HOLESAW BIM MHS 1-1/16"
IncludedComponents2 : HOLESAW BIM MHS 1-1/16"
IncludedComponents3 : HOLESAW BIM MHS 1-1/16"
IncludedComponents4 : HOLESAW BIM MHS 1-1/16"
IncludedComponents5 : HOLESAW BIM MHS 1-1/16"
ItemName : Morse MHS17 Bi-Metal Hole Saw, 1-1/16" Diameter, 1 Piece
ItemPackageDimensions_Height : 10.7 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 4.3 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : hole-saws
Manufacturer : MK Morse
Material : Metal
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
MeasurementSystem : Metric
ModelName : 177177
ModelNumber : MHS17
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : MHS17
Pattern : Solid
PowerSourceType : hand_powered
ProductDescription : Koopi 51mm Hole Saw with Attached Arbor, 2" Diameter

★ Feature
- Alternating teeth size enhances hole saw performance - cuts faster and lasts longer.
- Sharper Tooth Geometry cuts material faster for faster drilling.
- Increased wall thickness improves durability and minimizes tooth loss.
- Thick, hardened backing plates prevent thread stripping.
- Increased high speed steel height (M42 HSS) improves hole saw durability.
- Come with a heavy duty arbor, fits hole saws 1-1/4 inch - 6-5/8 inch.

★ Specification
- Cutting Diameter: 2 inches / 51 mm
- Cutting Depth: 1-1/2 inches / 38 mm
- Arbor size: Shank size: 7/16 inch; Thread size: 5/8 inch-18.
- Materials: M42 HSS BiMetal
- Color: Red

★ Package Included
- 1 x 2in hole saw
- 1 x hole saw arbor with pin
- 1 x pilot bit
- 1 x hex key

★Warm Tips - For longer saw life and lower operating cost
- When mounting arbor, lift up the disc with the pins and then screw the arbor down into the hole saw as far as it will go.Fit the drive pins into the pin holes in the hole saw by turning the hole save backwards.Push the pins in.Check that they are securely locked.
- Check that the arbor shank is securely inserted in the chuck on the drive unit.Tighten with chuck key.
- Cutting oil should be used when sawing steel.Do not use cutting oil when sawing cast iron.The cutting pressure should, however, be high so that each tooth cuts deep.Paraffin can be used when sawing aluminum.
- Use the correct rotation speed!Too high or too low a speed will decrease the life of the cutting edge.
- If the hole saw vibrates during sawing, the teeth may become damaged and break.The result is often a rough, imperfect hole.
- Clear away chips and plugs frequently in order to prevent overheating.
ProductSiteLaunchDate : 2017-03-08T23:02:31.747Z
Size : 1-1/16"
SkipOffer : 1
StreetDate : 2017-11-23T00:00:01Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 27112700