Cart 2 india

Specification
Brand : Starrett
BulletPoint1 : Optimized for Tough Materials - Specifically designed to tackle stainless and high alloy steels, non-ferrous light metals, and reinforced fabrics, ensuring optimal performance on challenging surfaces.
BulletPoint2 : Superior Cutting Speed - The hole saw can outpace traditional bi-metal hole saws in speed, delivering faster cuts and reducing work time significantly.
BulletPoint3 : Efficient Tooth Design - Equipped with tough tungsten carbide-tipped teeth, these saws boast a positive cutting angle, ensuring swift and smooth removal of chips and swarf for an uninterrupted drilling experience.
BulletPoint4 : Maximum Versatility - While optimized for a recommended depth, the tool offers a generous maximum cutting capability of 1/2 Inch, providing flexibility for a broader range of applications.
BulletPoint5 : 【Warm Reminder】- Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
Color : 1pcs
CompatibleMaterial : High Alloy and Stainless Steels, Nonferrous Metals and Reinforced Fabrics.
ExternallyAssignedProductIdentifier1 : 049659118919
ExternallyAssignedProductIdentifier2 : 0049659118919
ExternallyAssignedProductIdentifier3 : 00049659118919
GpsrSafetyAttestation : 1
IncludedComponents : Arbor, Pilot Drills
ItemName : Starrett Tungsten Carbide Tipped Stainless Steel Sheet Metal Hole Saw - Ideal for Stainless, High Alloy Steel, Non-Ferrous Metals, Reinforced Fabrics - 2 Inch - SM51
ItemPackageDimensions_Height : 15.4 centimeters
ItemPackageDimensions_Length : 6.2 centimeters
ItemPackageDimensions_Width : 6.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hole-saws
Manufacturer : Starrett
Material : Ceramic,Marble,Glass,Fiberglass,Diamond
ModelNumber : SM51
NumberOfItems : 1
PackageLevel : unit
PartNumber : SM51
PowerSourceType : Corded Electric
ProductDescription : Utoolmart 40mm Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool 1pcs

Technical Parameters
*Product Name: Glass Hole Saw.
*Drilling Diameter: 40mm/1.6inch
*Drilling Depth: 25mm/1inch
*Total Length: 50mm/2inch

Product Introduction：
*High performance in cutting glass, slate, tile, porcelain etc.
*Tiny diamond particles coated tip offers sharp cutting.
*To prolong its using life, please remember to keep it with coolant sometimes.

Instructions for Use of Glass Hole Opener
1. Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work. The hole should be smooth and do not apply side pressure and curve to drill.
2. Sufficient cooling and lubrication is required during continuous work, which has reduced the impact of product wear on use.
3. Workers need to wear corresponding protective equipment to protect workers from working safely.

ProductSiteLaunchDate : 2016-05-23T08:00:01.000Z
Size : 40mm
StreetDate : 2017-03-12T00:00:01Z
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal
UnitCount : 1
UnspscCode : 27112700