Cart 2 india

Specification
Brand : Utoolmart
BulletPoint1 : 【Dimension】- Drilling Diameter: 40mm/1.56"; Drilling Depth: 25mm/0.98"; Total Length: 50mm/1.96".
BulletPoint2 : 【Quality Material】- Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.Side holes allow for easy slug removal after drilling.
BulletPoint3 : 【Nickel Plated】- Nickel plating on these bits maximizes your tools life with great resistance to corrosion.Well made, sharp, hard, lasting.
BulletPoint4 : 【Application】- Cutting accurate holes on glass, ceramics, porcelain, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood.
BulletPoint5 : 【Warm Reminder】- Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
Color : 1pcs
CompatibleMaterial : Metal
ExternallyAssignedProductIdentifier1 : 049659118834
ExternallyAssignedProductIdentifier2 : 0049659118834
ExternallyAssignedProductIdentifier3 : 00049659118834
GpsrSafetyAttestation : 1
IncludedComponents : Arbor, Pilot Drills
ItemName : Utoolmart 1pcs 40mm/1.56 inch Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool Sliver
ItemPackageDimensions_Height : 7.9 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hole-saws
Manufacturer : Utoolmart
Material : Ceramic,Marble,Glass,Fiberglass,Diamond
ModelNumber : SM35
NumberOfItems : 1
PackageLevel : unit
PartNumber : UT190620HS-2031
PowerSourceType : Corded Electric
ProductDescription : Utoolmart 40mm Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool 1pcs

Technical Parameters
*Product Name: Glass Hole Saw.
*Drilling Diameter: 40mm/1.6inch
*Drilling Depth: 25mm/1inch
*Total Length: 50mm/2inch

Product Introduction：
*High performance in cutting glass, slate, tile, porcelain etc.
*Tiny diamond particles coated tip offers sharp cutting.
*To prolong its using life, please remember to keep it with coolant sometimes.

Instructions for Use of Glass Hole Opener
1. Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work. The hole should be smooth and do not apply side pressure and curve to drill.
2. Sufficient cooling and lubrication is required during continuous work, which has reduced the impact of product wear on use.
3. Workers need to wear corresponding protective equipment to protect workers from working safely.

ProductSiteLaunchDate : 2019-08-16T01:55:58.057Z
Size : 40mm
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal
UnspscCode : 27110000