Cart 2 india

Specification
Brand : Hard-to-Find Fastener
BulletPoint1 : Diameter: 1/8"
BulletPoint2 : Length: Short
BulletPoint3 : Material: Steel
BulletPoint4 : Finish: Zinc
BulletPoint5 : Head Style: Pan
Color : Silver
Color1 : Black
Color2 : Silver
Configuration : configuration
CustomerPackageType : 100
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier1 : 738287218718
ExternallyAssignedProductIdentifier2 : 014973264871
ExternallyAssignedProductIdentifier3 : 0738287218718
ExternallyAssignedProductIdentifier4 : 0014973264871
ExternallyAssignedProductIdentifier5 : 00738287218718
GpsrSafetyAttestation : 1
IncludedComponents : Hillman Plastic Anchors 3/4 " 100/Box
ItemName : Hard-to-Find Fastener 014973264871 Short Hollow Wall Anchors, 1/8-Inch, 10-Piece
ItemPackageDimensions_Height : 13.1 centimeters
ItemPackageDimensions_Length : 4.9 centimeters
ItemPackageDimensions_Width : 10.2 centimeters
ItemPackageQuantity : 1
ItemShape : shape
ItemTypeKeyword : hollow-wall-anchors
Manufacturer : Hard-to-Find Fastener
ManufacturerGrade : Grade 2
Material : Alloy Steel
MetalType : Alloy Steel
ModelName : Hillman Plastic Anchors 3/4 " 100/Box
ModelNumber : 014973264871
NumberOfBoxes : 1
NumberOfItems : 10
NumberOfPieces : 10
PackageLevel : unit
PartNumber : 1
ProductDescription : 3/16 inch Short Molly Bolt / Hollow Wall Anchors are used in wallboard, plaster, paneling, doors, and other soft, hollow base material. Fixtures can be removed and replaced without need to replace an anchor. A molly anchor works by expanding its legs after being inserted through a pre-drilled hole and tightened with the screw on the head of the anchor. This pulls the legs flush to the back of the wall and the head flush to the object you are securing. Dimensions: 1/4 inch Long (2 1/2 inches). Installation Instructions for molly bolts: 1. Pre-drill a hole that is the diameter of the anchor you are using. Smaller molly holes may be punched with an awl. 2. Insert the anchor through the fixture being hung and into the pre-drilled hole. (A washer can be used to seperate the screw head and the fixture for more holding strength and less surface pressure on a specific area.) 3. Tighten the screw and the molly will contract its legs while the head grips the outer wall causing a tight anchoring of the fixture to the wall.
ProductSiteLaunchDate : 2014-10-14T00:00:01-07:00
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=5466107
Scent : scent
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500