Cart 2 india

Specification
Brand : Northeast Fasteners
BulletPoint1 : 3/16 inch Short Molly Bolt / Hollow Wall Anchors - 25 pieces
BulletPoint2 : Zinc plated steel / Body length: 2 1/16 Inches
BulletPoint3 : For use in drywall, plaster, sheetrock, paneling, cinder block, etc
BulletPoint4 : Screws can be removed without disturbing the anchor
BulletPoint5 : Will not crack walls or crumble plaster
Color : No Color
Color1 : Black
Color2 : Silver
Configuration : configuration
CustomerPackageType : 100
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier1 : 0609053914649
ExternallyAssignedProductIdentifier2 : 609053914649
ExternallyAssignedProductIdentifier3 : 00008236107449
GpsrSafetyAttestation : 1
IncludedComponents : Hillman Plastic Anchors 3/4 " 100/Box
ItemName : NEF Molly Bolt/Hollow Wall Anchors, 3/16 Inch Short, Qty (25)
ItemPackageDimensions_Height : 32.893 centimeters
ItemPackageDimensions_Length : 5.4102 centimeters
ItemPackageDimensions_Width : 24.3078 centimeters
ItemPackageQuantity : 1
ItemShape : shape
ItemTypeKeyword : hollow-wall-anchors
Manufacturer : Northeast Fasteners Co., Inc.
ManufacturerGrade : Grade 2
Material : metal
MetalType : Zinc
ModelName : Hillman Plastic Anchors 3/4 " 100/Box
ModelNumber : HWA316S
NumberOfBoxes : 1
NumberOfItems : 100
NumberOfPieces : 50
PackageLevel : unit
PartNumber : HWA316S
ProductDescription : 3/16 inch Short Molly Bolt / Hollow Wall Anchors are used in wallboard, plaster, paneling, doors, and other soft, hollow base material. Fixtures can be removed and replaced without need to replace an anchor. A molly anchor works by expanding its legs after being inserted through a pre-drilled hole and tightened with the screw on the head of the anchor. This pulls the legs flush to the back of the wall and the head flush to the object you are securing. Dimensions: 1/4 inch Long (2 1/2 inches). Installation Instructions for molly bolts: 1. Pre-drill a hole that is the diameter of the anchor you are using. Smaller molly holes may be punched with an awl. 2. Insert the anchor through the fixture being hung and into the pre-drilled hole. (A washer can be used to seperate the screw head and the fixture for more holding strength and less surface pressure on a specific area.) 3. Tighten the screw and the molly will contract its legs while the head grips the outer wall causing a tight anchoring of the fixture to the wall.
ProductSiteLaunchDate : 2013-12-09T16:05:55.174Z
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=5466107
Scent : scent
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500