Cart 2 india

Specification
Brand : NutriEss
BulletPoint1 : [VERSATILE APPLICATION] This 3 Jaws Cylinder Honing Tool is designed for degreasing engine cylinders with diameters ranging from 3/4 inch to 2 1/2 inch and 1 1/4 inch to 3 1/2 inch. Its flexible shaft ensures easy and automatic centering, making it suitable for various engine sizes and types.
BulletPoint2 : [PRECISE CONTROL] Equipped with a knurling wheel, this engine hone allows you to adjust the spring pressure of the stone on the cylinder hole with precision. This feature ensures consistent and accurate honing results, enhancing the overall performance of your engine.
BulletPoint3 : [EFFECTIVE CLEANING] This tool is highly effective in removing carbon deposits, hot glazes, and deposits from cylinder holes. It is particularly ideal for older re-builds, ensuring a clean and smooth for optimal engine .
BulletPoint4 : [ CONSTRUCTION] Made from premium iron material, this cylinder honing tool is anti-, anti-, and built to last. Its construction guarantees a long lifespan, providing performance for years to come.
BulletPoint5 : [USER-FRIENDLY DESIGN] Featuring an ergonomic design, this engine hone is easy to operate and labor-saving. Its high work efficiency brings much convenience, allowing you to complete your honing tasks quickly and effortlessly.
Color : Silver
FabricType : metal
FitType : Universal
ItemName : Nutriess Engine Cylinder Honing Tool 3 Jaws Flexible Shaft Carbon Removing 2 to 6.7 Inch Range Car Hand Tool
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 42 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : honing-stones
Manufacturer : NutriEss
Material : metal
ModelName : NutriEsskapt39ynz2
ModelNumber : NutriEsskapt39ynz2
PartNumber : NutriEsskapt39ynz2
ProductDescription :

Condition: Brand New
Item Type: Cylinder Honing Tool
Material: Iron
Manufacturer Part Number: 88233
Range: Approx. 51-165mm/2-6.5in
Usage:
Step 1.
Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill.
Step 2.
Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second.
Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins.
Step 3.
After honing, use a paper towel to wipe out the inside of cylinder.

Package List：
1 x Cylinder Honing Tool
ProductSiteLaunchDate : 2025-04-15T08:04:47.888Z
Size : 7.50X1.20X1.00CM
Style : Modern
SupplierDeclaredDgHzRegulation : transportation
UnitCount : 1
UnspscCode : 31191500