Cart 2 india

Specification
AutoPartPosition : rear
Brand : Speedway Motors
BulletPoint1 : Louvered panel is 8" wide and 24" long with 16 louvers which are 3" wide and centered in the panel
BulletPoint2 : Fabricated by hand on a vintage Dean Moon (Moon Equipment Co.) louver press the old school way - one louver at a time
BulletPoint3 : Louvers measure 3” x 3/4” and 16" from the start of the first louver to the end of the last louver
BulletPoint4 : Commonly used for custom Hot Rod builds to graft into a hood, decklid, or roof panel to add louvers
BulletPoint5 : Premium 18 gauge bare steel material lends itself well to MIG or TIG welding but can also be bolted or riveted in place
Color : carbon fiber
CompatibleWithVehicleType : Car
ExternallyAssignedProductIdentifier1 : 0788392958818
ExternallyAssignedProductIdentifier2 : 788392958818
FitType : Vehicle Specific Fit
IncludedComponents : car parts
InstallationType : Peel & Stick
ItemName : 16 Hood Louver Sheet Metal Panel, 24 x 8 Inch 18 Gauge Bare Steel
ItemPackageDimensions_Height : 1.97 inches
ItemPackageDimensions_Length : 10.04 inches
ItemPackageDimensions_Width : 8.78 inches
ItemPackageQuantity : 1
ItemShape : irregular shape
ItemTypeKeyword : automotive-hood-louvers
Manufacturer : Speedway Motors
Material : Steel
ModelName : Speedway Motors
ModelNumber : gqwq
NumberOfItems : 1
PartNumber : 91019462
PartTypeId : 1396
ProductDescription : Stamped into 18-gauge steel sheet, perfect for classic car sheetmetal use. These universal hood louvers are 3-inches long and 3/4-inch in height. Stamped using original Moon Equipment Co louver press from Dean Moon’s shop. Each steel panel is fabricated in house by skilled craftsman. A much lower cost alternative to having metal louvered panels fabricated. Can be welded or riveted into place where louvers are commonly added on hot rods. Use as delivered for unique hot rod inspired wall art or other artistic expression. Additional panels can be welded together to provide multiple rows of louvers. Louvers are stamped centered on workpiece and are 16-inches in length. Perfect as additional engine bay cooling in early hot rods with multi-piece hoods. Hot Rod Louvers Hand Stamped to Enhance Your Hot Rod Build’s Custom Looks Functional sheet metal louvers for relieving engine bay heat or scooping cool air in for the brakes were very popular modifications to race cars back in the 1930s and 1940s. Many Le Mans race cars were punched full of louvers to aid in keeping the engine cool during those long, high rpm pulls down the Mulsanne straight. Circle track racers of the same period would also louver their race cars as well. These 3- to 5-inch universal hood louvers were stamped often in several rows, completely covering a panel or the whole engine bay area of the race car. While on the streetCompatible with Ford’s from the Model T and Model A and up through models of the late 1930s provided some form of louvered car hood or engine side panel. They were more elegant than functional (which is why we see so many Model As and Deuces with no engine cover panels at all!) and often these cars, as well as Compatible with Chevy and Compatible with Dodge models from the same pre-war era, would get custom hot rod louvers stamped into their hoods, roofs, and trunk lids during the hot rod boon of the ’50s and ’60s
ProductGrade : like new
ProductSiteLaunchDate : 2021-11-09T01:25:33.385Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : 2