Cart 2 india

Specification
Brand : VAKTOK
BulletPoint : For 1/2" inch diameter.
BulletPoint1 : Heavy duty low profile wand tilter rod is made of high quality plastic and metal materials, with metal hooks, durable, not easy to break or deform, can be used for a long time, suitable for internal installation.
BulletPoint2 : The shutter rod control is approximately 39mm/1.5 inches wide and 75mm/2.9 inches high. In order to mount on gears, make sure that the blind metal rod is square in the blind head rail.
BulletPoint3 : The low profile wand tilter mechanism has a 0.17-inch square gear hole in the center, (which means that the metal rod in the shutter rod must be square to fit the gear.)
BulletPoint4 : All you need is a tape measure and pliers, and the installation process is very simple and easy to replace: the slender wand tilter can replace the old wand, so the blinds can be easily repaired.
BulletPoint5 : The wand tilter is suitable for 2-inch horizontal louvers, square gears, and hook connections. To ensure its practicality and popularity, practicality and reliability.
CareInstructions : Spot Clean
Color : Transparent
ControlType : Wand
ExternallyAssignedProductIdentifier : 5390893237023
ExternallyAssignedProductIdentifier1 : 797424653003
ExternallyAssignedProductIdentifier2 : 0797424653003
FabricType : Nullify
GpsrSafetyAttestation : 1
IncludedComponents : User Manual
ItemDisplayDimensions_Depth : 0.1 inches
ItemDisplayDimensions_Length : 70.5 inches
ItemDisplayDimensions_Width : 3.5 inches
ItemDisplayWeight : 2.02 pounds
ItemName : VAKTOK Heavy Duty Low Profile Wand Tilter Rod Tilt Mechanism Hook for 2 inch Horizontal Blinds Square Shaped Gear/Hook Connection（2PCS）
ItemPackageDimensions_Height : 9.0932 centimeters
ItemPackageDimensions_Length : 2.8956 centimeters
ItemPackageDimensions_Width : 6.1976 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : window-treatment-horizontal-blinds
Manufacturer : VAKTOK
Material : Synthetic
Material1 : Plastic
Material2 : Metal
ModelName : DFGJ25
ModelNumber : dfsS5
MountingType : Inside Mount
NumberOfItems : 2
NumberOfPanels : 10
Opacity : 0 inches
OperationMode : Manual
PartNumber : HHHGK
Pattern : Solid
PatternType : Solid
ProductDescription : Product Name: Heavy Duty Low Profile Wand Tilter Rod
Material: Plastic and metal
Color: Transparent
Sizes: Width about 1.5 inches, height about 2.9 inches
Weight: About 10 grams
Installation steps:
1 Remove the blinds from the window and place them on a flat surface.
2 Use pliers to remove any end reinforcements pressing on either side of the end of the headrail.
3 Slide the metal rod out of the gear of the old wand tilting device.
4 Open the top column slightly and remove the tilter from the top column.
5 Install the tilter so that the tilter is in place, then slide the metal rod through the center gear hole.
6 Put the end reinforcement back in place, attach the wand, and hang the curtains.
Package include：2PCS Heavy Duty Low Profile Wand Tilter Rods
Note:
Please check the size in the picture carefully to make sure it matches your device before ordering.
Before buying, check what shape the metal rod is located inside the headrail of your blinds.
ProductSiteLaunchDate : 2023-06-21T14:05:47.995Z
RecommendedUsesForProduct : Indoor
RoomType : Bedroom
Size : 1.5"W x 2.89"H
SpecificUsesForProduct : Home Décor
Style : Cordless
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52131702
WaterResistanceLevel : not_water_resistant