Cart 2 india

Specification
Brand : Keenso
BulletPoint1 : [3D printed Cover] Single design without layers for an elegant appearance
BulletPoint2 : [Temperature control] wide temperature range of 0 ° C to 350 ° C for versatile use
BulletPoint3 : [Practical size] Compact product size 5.6 x 5.6 x 3.5cm for easy handling
BulletPoint4 : [PD65W power supply] Admit PD65W 20V 3.25A Power supply for efficient operation
BulletPoint5 : [Admits the USB interface type C for convenient connectivity
Color : #711
ExternallyAssignedProductIdentifier : 7704990756635
IncludedComponents : No
ItemName : Mini Heating Welding Plate Mini Intelligent Thermostat for Laboratory DIY, Hot Plate Welder With Welding Station Chips Quick Preheating
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-hot-plates
Manufacturer : Keenso
ModelName : Keenso62og37ydsc
ModelNumber : Keenso62og37ydsc
NumberOfItems : 1
PartNumber : RUMDS
ProductDescription : 1. Mini Thermostat: Intelligent thermostatic heating table in super mini size with 3D printed housing without layers
2. Functions and effects: Heating welding plate can eliminate redundant functions, retain enough effective heating area, largely saving energy consumption and heating time
3. Screen and control: hot welder plate with organic light emitter diode, support temperature control
4. Low loss: The field of application of the hot plate for welding is wide and the operational parts are centrally pre -reducing to reduce the damage to the nearby parts
5. Fast and efficient: Chips welding station supports the USB type C interface and PD protocol for a heating speed

Specs:
Article type: heating welding plate
Input interface: Type C
Power supply: PD65W 20 V 3.25 A (PD65W) is recommended
Temperature range: 0 ℃ ~ 350 ℃ (the lowest temperature is ambient temperature, it can only be increased, it cannot be reduced)
Housing: 3D printed housing, without layers
Product size (length x wide x high): approx. 5.6 x 5.6 x 3.5 cm/2.2 x 2.2 x 1.4 inches

How to use it:
1. Double keys pressed at the same time: heat or stop heating2. Keep pressed twice to enter the menu screen or leave3. Hold the double key to confirm

Packaging list:
1 heating welding plate.

Note:
1. The recommended temperature should not exceed 250 ℃.
2. The power supply needs a loader that admits the PD protocol, the voltage is 20 V 3.25 A and the voltage that the PD protocol can admit is 20 V in .
ProductSiteLaunchDate : 2025-05-09T14:47:00.740Z
Size : DC12V
Style : DC12V
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41112209