Cart 2 india

Specification
AutoPartPosition : outer
Brand : Circuit Performance
BulletPoint1 : Circuit Performance Hub Centric Rings are made of high tensile strength, chemical resistant nylon. The hubrings will help to eliminate vibrations that may occur when your wheel is not perfectly centered around the vehicle's hub.
BulletPoint2 : INNER DIAMETER: 60.1mm → Your vehicle's hub diameter must match this size
BulletPoint3 : OUTSIDE DIAMETER: 76.1mm → Your wheel center bore must be this size
BulletPoint4 : Compatible with Lexus, Toyota, Scion
BulletPoint5 : Compatible with 76.1mm Centerbore Wheels from TSW, XO Luxury, Black Rhino & more
Color : Black
ExternallyAssignedProductIdentifier1 : 0639385694445
ExternallyAssignedProductIdentifier2 : 639385694445
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
ItemName : Circuit Performance Hub Centric Rings (4 Pack) - 76.1 to 60.1 Black Nylon Hubrings - Compatible with Lexus, Toyota, Scion with 60.1mm Vehicle Hub Using Wheels with 76.1mm Centerbore
ItemPackageDimensions_Height : 16.3068 centimeters
ItemPackageDimensions_Length : 3.9116 centimeters
ItemPackageDimensions_Width : 13.589 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hub-centric-rings
Manufacturer : Circuit Performance
Material : Nylon
PackageLevel : unit
PartNumber : CP-SET-HRN-76.1-60.1
ProductDescription :

Product Information:

One set of 4 hub centric rings with O.D. (outer diameter) of 106mm and I.D. (inner diameter) of 93.1mm. These rings are made of high quality poly carbon.

Hub Centric Ring And Its Purpose:

Hub centric rings is plastic or metal piece that is inserted between the vehicle hub and the wheel center bore. It fills the gap in between. This allows the wheel bore to engage fully with the vehicle hub with the help of hub centric rings. Thus any vibrations caused by the gap is eliminated.

Technical Specification:

I.D. (inner diameter) - fit vehicle hub 93.1mm
O.D. (outer diameter) - fit rim bore 106mm
Set contains - 4 hub centric rings

Technical Note:

To determine proper fitment you need to do a two things.

First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed.

Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, they are the right size.

ProductSiteLaunchDate : 2020-11-23T03:20:32.698Z
Size : 76.1mm OD to 60.1mm ID
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000