Cart 2 india

Specification
AutoPartPosition : outer
Brand : Motoforti
BulletPoint1 : Accurate: 2 pcs Aluminium Alloy Hub centric Rings. Used to between vehicle's hub and the wheel
BulletPoint2 : About: Fit for any vehicle with a 65.1mm hub that needs to adapt a wheel with a 83.1mm center bore (OD=83.1mm, ID=65.1mm)
BulletPoint3 : Information: Suitable for all four wheels of the car
BulletPoint4 : Nice: Heat resistant so it will not melt in even the driving conditions
BulletPoint5 : Attention: Eliminate vibrations caused by your wheels not centering correctly onto your vehicle's hub
Color : Silver Tone
FitType : Universal
GpsrSafetyAttestation : 1
ItemName : Motoforti 2pcs OD 83.1mm to ID 65.1mm Aluminium Alloy Car Hub Centric Rings Wheel Bore Center Spacer Long-Lasting
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 5.91 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hub-centric-rings
Manufacturer : Motoforti
Material : Aluminium Alloy
ModelNumber : IFN240711a000341
NumberOfBoxes : 1
PartNumber : fmoto240711004569
ProductDescription : Notes:
The outside diameter of the spigot ring should fit the wheel's center bore in the back of the wheel.
The inside diameter is the size of the wheel hub on the vehicle you intend to fit the wheels too.

Specification:
Inner Diameter: (Vehicle Hub Size) 65.1mm / 2.56"
Outer Diameter: (Wheel Bore Size) 83.1mm / 3.27"
Depth: 10mm /0.39"
Material: Aluminium Alloy
Color: Silver Tone

Description:
This device is installed between the vehicle's hub and the wheel.
The hub ring fills in the gap between the vehicle hub and the center bore of the wheel.
Ensures a precise fit between your wheel and the hub.
Designed to eliminate unwanted steering wheel vibrations.
Precision machined to stop vibrations and ensure a snug fit every time.

How to choose the hub ring?
Hub rings are sized by using two different numbers that are measured in millimeters.
The smaller of the 2 measurements such as 65.1 is the inner diameter. This should match your vehicle's hub bore.
The larger of the 2 measurements such as 83.1 is the outer diameter. This should match your wheel's center bore.

Package Included:
2 x Hub Centric Rings


ProductSiteLaunchDate : 2024-08-01T11:51:36.648Z
Size : OD 83.1mm to ID 65.1mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000