Cart 2 india

Specification
Brand : WHEEL CONNECT
BulletPoint1 : Outside Diameter (O.D.) 72.1 mm. Must match wheel center bore. Inner Diameter (I.D.) 57.1mm. Must match the vehicle hub bore. Select the correct size from the size list above and then click Buy Now.
BulletPoint2 : [BENEFITS] Hub Centric Rings will fix the vibrations caused by aftermarket alloy wheels not centering correctly onto your vehicle's hub. Converts your aftermarket wheels from lug centrically installed to hub-centrically installed. Easy to Install.
BulletPoint3 : [QUALITY] These Hubrings are made of Aluminium Alloy, Nice looking, corrosion resistant , heat resistant and durable.
BulletPoint4 : [FITMENT] Buyer is responsible for ordering the correct size. It is necessary that you measure your vehicle's hub and your wheel's center bore before purchasing. See the description section for additional information. Any question regarding fitment please contact us for professional advice.
BulletPoint5 : [SERVICE AND QULITY ASSURANCE] WHEEL CONNECT is a Canadian brand, designed and serviced in Canada.
Color : Silver
ExternallyAssignedProductIdentifier1 : 639385706438
ExternallyAssignedProductIdentifier2 : 0639385706438
FitType : Universal
ItemName : WHEEL CONNECT Hub Centric Rings,72.1 to 57.1, Set of 4, Aluminium Alloy Hubrings, O.D:72.1-I.D:57.1mm. A
ItemPackageDimensions_Height : 8.2 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 8.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hub-centric-rings
Manufacturer : Wheel connect
ModelName : HR7210A
ModelNumber : HR7210-5710A
PartNumber : HR7210-5710A
ProductDescription : How to choose the right size:
O.D 72.1mm: Check the Centre Bore (CB) data of the wheel you have on hand. This can be found on the box label. If CB cannot be found on the box or back of the wheel, measure the center hole’s diameter using a caliper.
Inner Diameter (I.D.) should match the vehicle’s center hub. Different vehicle comes with different hub size. The vehicle center hub will be different depending on year, model, make, and brand.

Here is an I.D reference list：
54.1
56.15=56.1
56.6
57.1
60.06=60.1
63.4=63.5
64.1=64.15
65.1
66.1=66.06
66.6=66.56
66.9
67.1
70.5
71.5
72.6=72.56
Not sure exactly what size hub-rings you need? Don't waste time and money guessing. Just send us a message with what wheels you have, what make, model, and year of vehicle you have, and we will be happy to recommend the correct hub-ring for you.

How to install:
Insert the Hub Centric Rings into the wheel center bore and then install it onto vehicle wheel hub.

Q&A
Q: My wheel’s CB is 73.1mm. Can I use a hub ring Outer Diameter at 74.1?
A: No. Must use the ones with O.D 73.1mm.

Q: My wheel’s CB is 74.1mm. Can I use a hub ring Outer Diameter at 73.1?
A: No. You can only use hub rings O.D 74.1 or sometimes marks as 74.

Q: What is the tolerance of these Diameter data?
A: Normally accept ±0.1mm. So:
56.15=56.1; 60.06 = 60.1; 64.15 = 64.1;
66.06=66.1; 66.56 = 66.6; 72.56 = 72.6; 74=74.1

Q：I chose the right size, but Why can’t I push hubring into wheel, or push it onto Hub?
A: Hub, hub ring, wheel are fit each other tightly, So they can’t fit in when there is rust or dirt on the Hub, or some rough edges of the hub ring or some paints over sprayed onto wheel center bore. So sand these slightly with a sand paper and try it again.

ProductSiteLaunchDate : 2023-05-16T05:18:16.725Z
Size : OD72.1--ID57.1mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000