Cart 2 india

Specification
AutoPartPosition : outer
Brand : X AUTOHAUX
BulletPoint1 : 2 pcs Aluminium Alloy Hubcentric Rings. Designed to correct minor wheel and hub dimensions.
BulletPoint2 : Fit for any vehicle with a 64.1mm hub that needs to adapt a wheel with a 70.6mm center bore (OD=70.6mm, ID=64.1mm)
BulletPoint3 : Placement on Vehicle: Left, Right, Front, Rear
BulletPoint4 : Heat resistant so it will not melt in even the extreme driving conditions.
BulletPoint5 : Eliminate vibrations caused by your wheels not centering correctly onto your vehicle's hub.
Color : Silver Tone
ExternallyAssignedProductIdentifier1 : 639385694841
ExternallyAssignedProductIdentifier2 : 0639385694841
FitType : Universal
GpsrSafetyAttestation : 1
ItemName : X AUTOHAUX 2pcs OD 70.6mm to ID 64.1mm Aluminium Alloy Car Hub Centric Rings Wheel Bore Center Spacer
ItemPackageDimensions_Height : 13.97 centimeters
ItemPackageDimensions_Length : 1.524 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : hub-centric-rings
Manufacturer : X AUTOHAUX
Material : Aluminium Alloy
ModelNumber : CP-SET-HRN-ALU-76.1-60.1
PackageLevel : unit
PartNumber : a23070500ux0229
ProductDescription : Notes:
The outside diameter of the spigot ring should fit the wheel's center bore in the back of the wheel.
The inside diameter is the size of the wheel hub on the vehicle you intend to fit the wheels too.

Specification:
Inner Diameter: (Vehicle Hub Size) 64.1mm / 2.37''
Outer Diameter: (Wheel Bore Size) 70.6mm / 2.78''
Depth: 10mm / 0.39"
Material: Aluminium Alloy
Color: Silver Tone

Description:
This device is installed between the vehicle's hub and the wheel.
The hub ring fills in the gap between the vehicle hub and the center bore of the wheel.
Ensures a precise fit between your wheel and the hub.
Designed to eliminate unwanted steering wheel vibrations.
Precision machined to stop vibrations and ensure a snug fit every time.

How to choose the hub ring?
Hub rings are sized by using two different numbers that are measured in millimeters.
The smaller of the 2 measurements such as 64.1 is the inner diameter. This should match your vehicle's hub bore.
The larger of the 2 measurements such as 70.6 is the outer diameter. This should match your wheel's center bore.

Package Included:
2 x Hub Centric Rings


ProductSiteLaunchDate : 2020-11-23T03:20:32.698Z
Size : OD 70.6mm to ID 64.1mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000