Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : Double Scales: This ruler has two unit scales for g/cm³ and lb/gal. You can shift between the two different units very clearly and easily
BulletPoint2 : Accurate Measurement: The smallest measuring range of this ruler is 0.01 g/cm³and 0.1 lb/gal. This allows for accurate enough measurement of liquids
BulletPoint3 : Easy to Operate: The balance of the bar can be observed by the level at the top of the bar. The weight of the mud is read directly on the scale after placing it in the cup
BulletPoint4 : Material: The ruler's bar and the surface of the hydrometer are made of hard aluminum alloy and stainless steel respectively, which is not easy to wear, rust and deform
BulletPoint5 : Application: This mud hydrometer can be used for liquid density analysis and weight measurement at road construction sites, bridges, mixing stations, or laboratories
Color : Assorted Color
IncludedComponents : 1* Mud Hydrometer; 1* Toolbox; 1* English Manual
ItemDisplayDimensions_Length : 6.69 inches
ItemDisplayWeight : 0.08 pounds
ItemName : Mud Hydrometer, Mud Specific Gravity Meter Scale for Liquid Densimeter Analysis Weight Measurement, 0.01 g/cm³ 0.1 lb/gal Measurement Accuracy, 0.96-2.5g/cm³ Measuring Range
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 7.48 inches
ItemPackageDimensions_Width : 1.57 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-hydrometers
ItemVolume : 38.25 cubic_centimeters
Manufacturer : AGULIUM
Material : glass
ModelNumber : WMZ3243561JF
NumberOfItems : 1
PackageLevel : unit
PartNumber : BI-HS8300-6
ProductDescription :

Details

• Durable Sample Cup: The sample cup of this item is made of engineering plastic, which can ensure accurate measurement during long-term use.
• Horizontal Vesicle: This item has a horizontal vesicle on top of the ruler. You can check whether the bar has been leveled by looking through the green bubble.
• Toolbox: This item comes with a toolbox that will keep your tools well organized. It can be easily stored and carried.

Application

This mud hydrometer can be used for liquid density analysis and weight measurement at road construction sites, bridges, mixing stations, or laboratories.

Specifications

• Sample Cup Material: Engineering Plastic
• Rod Material: Aluminum Alloy
• Ruler Material: Stainless Steel
• Unit: g/cm³, lb/gal
• Gross Weight: 1.65kg/3.64 lbs
• Net Weight: 1.5kg/3.31 lbs
• Package Size: 55*17*10cm/21.65*6.69*3.94"
• Product Size: 50*14*10cm/19.68*5.51*3.94"

How to Use

• 1.Fill the sample cup with mud and level the mouth of the cup without leaving air bubbles.
• 2.Gently cover the cup with the lid and wipe off any excess mud.
• 3.Slowly move the weight. When the bubble of the horizontal vesicle is in the center, the lever indicates that it is level.
• 4.Read out the scale shown on the left side of the weight, that is the specific gravity of the mud.
• 5.The instrument should be rinsed and wiped clean after use.

Package Included

• 1* Mud Hydrometer
• 1* Toolbox
• 1* English Manual

Notes

To check whether the instrument is accurate. You can fill the sample cup with distilled water and use the same method to measure the specific gravity measured if it is 1, then the hydrometer is accurate.

ProductSiteLaunchDate : 2025-04-15T08:53:48.884Z
Size : 17.00X1.50X1.50CM
StreetDate : 2017-03-16T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41000000