Cart 2 india

Specification
BulletPoint1 : *NOTE* All buckets as of 12/09/19 are NEW MOLD buckets
BulletPoint2 : Four 50 mil 1 gallon buckets | Snap-On 4-Tab lid with gasket for each bucket
BulletPoint3 : Assembled height approx. 8.45" (one bucket + one lid)
BulletPoint4 : BPA free Food-grade Plastic; Plastic resin USA sourced // Made in the USA.
BulletPoint5 : Please refer to the detailed description below...
Capacity : 1 gallons
Color : White
ItemName : Bucket Kit, Four 1 Gallon Buckets with White Snap-on Lids
ItemPackageDimensions_Height : 18 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 9 inches
ItemPackageQuantity : 4
ItemShape : Round
ItemTypeKeyword : ice-buckets
Manufacturer : API Kirk Containers
Material : Plastic
ProductDescription : This kit includes four white 50 mil 1-gallon buckets with white snap-on lids with O-ring gaskets. Lids have tear strips for secure first-time use. Remove the tear strip to remove the lid. The lid can be re-used after the tear strip is removed. The lids have four tabs for engagement of the rim of the bucket. Between the tabs the lid is essentially rim-less and with the gasket captured but partially visible between the tabs. Snapping and un-snapping the lid requires some force… though it may be less than one might typically expect from an industrial bucket lid, it is not to be compared with plastic kitchenware products. Some folks with limited hand strength may find them difficult but we view these 4-tab lids as relatively friendly. Initial installation of the lid prior to removal of the tear strip is best accomplished with a rubber mallet (not included). Removal of the lids can be facilitated by the use of a ‘bucket wrench’ or ‘lid lifter’ available separately. Note: ‘Food grade’ markings are not required in the US. Portions of the industry object to the term favoring "FDA compliant materials." The resin manufacturer will produce resin that they identify as FDA compliant. The molder will then declare the use of FDA compliant materials.... casually referred to as 'food grade' by regular folks like you and I. Some retailers will put a sticker on the bucket but we've yet to see one marked as such through our supply chain. HDPE is a preferred material of food packagers. ‘BPA’ is a chemical used in some plastics but not in HDPE. 'BPA free' markings are not typical with HDPE. The industry accepted terminology is 'BPA non-intent' but we reference ‘BPA free’ to efficiently communicate that this product is a great solution for those concerned about BPA. Outbound shipping is included in the price! However, our actual shipping expenses do reduce the funds available for refund in the event of an elective return. Please refer to the PolyFarm shipping policy for details.
ProductSiteLaunchDate : 2015-01-30T08:00:00.000Z
UnitCount : 1
UnspscCode : 52150000