Cart 2 india

Specification
Brand : Incubator Warehouse
BulletPoint1 : All-in-one thermostat, heater, fan control unit
BulletPoint2 : For Mid-Size & Cabinet Incubators
BulletPoint3 : Choose Basic or Advanced thermostat module
BulletPoint4 : Digital electronic pre-set (99.5 F) thermostat
BulletPoint5 : Option to use 1 or 2 heater and fan modules (125 watts or 250 watts)
Color : IncuStat Advanced Thermostat
ExternallyAssignedProductIdentifier1 : 714854791211
ExternallyAssignedProductIdentifier2 : 0714854791211
ExternallyAssignedProductIdentifier3 : 00714854791211
GpsrSafetyAttestation : 1
ItemDisplayWeight : 1 pounds
ItemName : IncuKit™ XL for Cabinet Incubators (IncuStat™ Advanced Thermostat, 1 x Fan/Heater Unit (125 Watts))
ItemPackageDimensions_Height : 33.909 centimeters
ItemPackageDimensions_Length : 5.5118 centimeters
ItemPackageDimensions_Width : 28.2956 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-incubator-accessories
Manufacturer : Incubator Warehouse
Material : Iron
ModelNumber : IKXL
NumberOfBoxes : 1
NumberOfItems : 10
PartNumber : IKXL-PTST-NO-XLF1-110V
Pattern : Solid
ProductDescription : The IncuKit XL is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor. Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. To determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your inubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices.
ProductSiteLaunchDate : 2015-12-22T19:22:12.621Z
Size : 1 x Fan/Heater Unit (125 Watts)
Style : Manual
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 41112209
Voltage : 110 volts
Wattage : 250 watts