Cart 2 india

Specification
AutoPartPosition : inner
Brand : GODIYMODULES
BulletPoint : 1
BulletPoint1 : 1, the audio input signal amplitude can be adjusted, VR1 and VR3 to change the input signal amplitude
BulletPoint2 : 2. This board is not a preamplifier and has no power amplification. It only uses the way of fluorescent column to show the change of the amplitude of the audio signal, so that the audio signal is changed from auditory to visual (visual effect).
BulletPoint3 : 3. The parameters of the two tubes are inconsistent due to the individual differences of the 6E2 tubes. After the lighting, the fluorescence heights of the two tubes are not the same. Therefore, two trimming resistors are set on the driving board, and VR2 and VR4 are used to adjust the fluorescence height of the left and right tubes to achieve Highly consistent fluorescence of the two tubes
BulletPoint4 : 4. Pipe connection: The extension of the socket pin has been soldered out, and it is connected to the corresponding terminal number of the driver board according to the color of the lead wire (the delivery is accompanied by a wiring instruction)
BulletPoint5 : 5, the base is made of universal small nine-legged tube ceramic tube seat front mounting hole distance 28mm, panel opening: 18mm
Color : White
ControlMethod : touch
ExternallyAssignedProductIdentifier : 6420355037935
ExternallyAssignedProductIdentifier1 : 0738920632260
ExternallyAssignedProductIdentifier2 : 738920632260
ExternallyAssignedProductIdentifier3 : 0888614470156
IncludedComponents : 1: Dual way 6E2 driver board: 1,2:6E2 tube: 2,3: Tube seat (with extension lead): 2
ItemName : 6E2 cat Eye Tube Indicator Driver Board kit Dual Channel Fluorescent Level Indicator Drive Amplifier DIY Modification New
ItemPackageDimensions_Height : 0.39 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : indicator-lights
Manufacturer : GODIYMODULES
Material : pcb
ModelName : Mod-6E2Finshed-001
ModelNumber : Mod-6E2Finshed-001
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Mod-6E2Finshed-001
PowerSourceType : Corded Electric
ProductDescription :

6E2 High-voltage drive version Package list:

1: Dual way 6E2 driver board: 1

2:6E2 tube: 2

3: Tube seat (with extension lead): 2

4: Power supply: the power supply needs to bring its own or take the internal voltage)

> DC 250V

>6.3V or 12v AC/DC

 

The two-way 6E2 cat's eye tube drive, the tube base is connected with the main board by flying wire, the wiring is simple, the use is more convenient, and the new design of the board minimizes the space occupied by the machine.

1, the audio input signal amplitude can be adjusted, VR1 and VR3 to change the input signal amplitude

2. This board is not a preamplifier and has no power amplification. It only uses the way of fluorescent column to show the change of the amplitude of the audio signal, so that the audio signal is changed from auditory to visual (visual effect).

3. The parameters of the two tubes are inconsistent due to the individual differences of the 6E2 tubes. After the lighting, the fluorescence heights of the two tubes are not the same. Therefore, two trimming resistors are set on the driving board, and VR2 and VR4 are used to adjust the fluorescence height of the left and right tubes to achieve Highly consistent fluorescence of the two tubes

4. Pipe connection: The extension of the socket pin has been soldered out, and it is connected to the corresponding terminal number of the driver board according to the color of the lead wire (the delivery is accompanied by a wiring instruction)

5, the base is made of universal small nine-legged tube ceramic tube seat front mounting hole distance 28mm, panel opening: 18mm

6, PCBA wiring: ainR / ainL: left and right channel audio signal input

G: ground

250V: (DC),

 

Left and right terminal block serial number and description:

1. Connect the gate, (6E2 tube signal injection pin) to the socket 1st pin

3, connect the cathode, pipe grounding foot, take the third leg of the socket

7, connected to the control grid, used to control the fluorescent height of the tube, the seventh base of the socket

8, connected to the anode, 6E2 tube power supply feet, take the 8th foot of the tube

Pins 4 and 5 of the header are filament supply pins (6.3V supply)

Note: The two tubes are connected in parallel to the 6.3V power supply!

Two tubes of filaments are connected in series to take 12V power supply!

Note: The 100K position of the DIY kit welding resistance should be 120K.

ProductSiteLaunchDate : 2024-08-09T07:53:46.239Z
Size : 10 Pcs
SpecificationMet : CE
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39100000
Voltage : 240 volts
WarrantyDescription : 2 year manufacturer.