Cart 2 india

Specification
Brand : Heschen
BulletPoint1 : Mounting Hole Diameter: 18mm
BulletPoint2 : Detecting Distance: 8mm±10%; Set distance: 0-7mm
BulletPoint3 : Output Type: NC(Normally Closed), Non-Shield Type
BulletPoint4 : Current Output: 400mA; Working Voltage: 90-250 VAC
BulletPoint5 : Detect Object: Magnetic metal
Color : Blue
ExternallyAssignedProductIdentifier1 : 670534170939
ExternallyAssignedProductIdentifier2 : 0670534170939
ItemName : Heschen M18 Inductive Proximity Sensor Switch Non-Shield Type LJ18A3-8-J/DZ Detector 8mm 90-250VAC 400mA Normally Closed(NC) 2 Wire
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : inductive-proximity-sensors
Manufacturer : Heschen Electric
Material : Shell : Nickel plated brass , Detection surface : ABS
MaximumRange : 8 meters
ModelNumber : HS-LJ18A3-8-J/DZ
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : LJ18A3-8-J/DZ
PowerSourceType : Corded Electric
ProductDescription :

Detection Object: Magnetic metal(the detection distance decreases when it is non-magnetic metal).

Delay Distance: 10% below of the detection distance.

Supply Voltage:AC90-250V 50/60Hz.

Comsuption Current: 1.7mA below.

Control Output: 400mA below.

Loop Protection: Surge absorption.

Ambient Temperature & Humidity:During operation, storage: individually-30～＋65℃(no freeze ,no drew ), During operation,storage:individually 35-95%RH.

Insulation Impedance: 50MΩ above ( DC500 megameter ) between charging part and shell.

Withstand Voltage: AC1000V 50/60Hz 1 min. between charging part and shell.

Temperature Influence: Temperature range-30～＋65℃,at + 23℃,± 15% detection distance, Temperature range-25～＋60℃,at +23℃,±10% detection distance.

Voltage influence: Inside ±15% rated supply voltage range,at rated supply voltage value ,inside ± 10 % detection distance.

ProductSiteLaunchDate : 2020-03-25T13:56:57.346Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable