Cart 2 india

Specification
Brand : Larson Electronics
BulletPoint1 : This light mast extends from 6 feet to 20 feet.
BulletPoint2 : The light mast weighs approximately 1300 pounds.
BulletPoint3 : Its steel construction has a capacity of 150 pounds and has a wind resistancy of 125 miles per hour.
BulletPoint4 : Operation is provided by two 2,500 pound hand winches.
BulletPoint5 : Contact us today for information about custom options tailored to meet your specific needs
ItemName : 20 Foot Five Stage Fixed Mount Light Mast - Extends up to 20' - Collapses Down to 6.5' - Powder Black Finish
ItemPackageDimensions_Height : 24 inches
ItemPackageDimensions_Length : 40 inches
ItemPackageDimensions_Width : 96 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-light-towers
Manufacturer : Larson Electronics LLC
Material : Steel
ModelNumber : 144216
NumberOfItems : 1
PartNumber : 144216
ProductDescription : This unit is Made In USA - Manufactured in Texas. by Larson Electronics. This fixed mount 5-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to twenty feet and collapse to six and a half feet when fully collapsed. This crank up light tower features a rotating boom that allows for 360 degrees of rotation and a removable mast head for storing mounted equipment when not in use. This telescoping five stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 20` for effective coverage. This light boom can be extended to 20` for maximum area coverage and collapsed to 6.5` for applications where a footprint smaller is required. This allows operators to collapse the mast and leave it in the upright position during transit if desired depending on equipment mounted to the mast head). The tower is constructed of square steel tubing with a base section 4.54` in length and 6" by 6" by 3/16" thick, lower section 4.73` in length and 5" by 5" by 3/16" thick, middle section 4.92` in length and 4" by 4" by 1/8" thick, upper section 5.10` in length and 3" by 3" by 1/8" thick, and an top section 5.60` in length and 2" by 2" by 1/8" thick. Each section has an overlap of at least 12 inches. The mast is extended to its full height using an included 2,500 lbs hand winch with 3/16" galvanized steel cable. Contact us today for more information about our custom options tailored to meet your specific industry needs.
ProductSiteLaunchDate : 2024-04-26T19:09:42.338Z