Cart 2 india

Specification
Brand : DYNASOLVE
BulletPoint1 : Genuine OEM replacement part
BulletPoint2 : We are a world leader manufacturer of quality ware washing and Dynamic food preparation equipment
BulletPoint3 : Use genuine OEM parts for safety reliability and performance
BulletPoint4 : Proprietary additive system minimizes wear and keeps the system clean
BulletPoint5 : Long-life fluid extends time between rebuilds
Color : No Results
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier1 : 0734463591941
ExternallyAssignedProductIdentifier2 : 734463591941
Hazmat : 9
IncludedComponents : PLUSH Dynamic Light
ItemForm : Oil
ItemName : Dynasolve Iso-Neutralizer, 1 Gallon
ItemPackageDimensions_Height : 13.01 inches
ItemPackageDimensions_Length : 7.01 inches
ItemPackageDimensions_Width : 11.01 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-lubricants
LiquidVolume : 4 fluid_ounces
Manufacturer : DYNASOLVE
Material : Mineral or Synthetic Oil
ModelNumber : SMMC2149103
NumberOfItems : 1
PackageLevel : unit
PartNumber : J102-33
ProductDescription : Does Not Meet State of California VOC Compliance, Cannot Be Sold in CA. Non-flammable solvent for pre-flushing. Dynasolve Iso-Neutralizer is a companion product to Dynaloy's safety solvents for urethanes. It is non-chlorinated, non-flammable, non-carcinogenic, and non-ozone depleting. Dynasolve Iso-Neutralizer is used to remove any excess liquid of isocyanates from processing equipment prior to flushing and cleaning processes targeted at removing crystallized isocyanates and cured urethane material. Applications: Dynasolve Iso-Neutralizer is designed for use in isocyanate feed tanks and equipment that contain crystallized isocyanate residue. This pre-flushing step is necessary when it is not possible to drain out all remaining liquid isocyanates from the equipment; usually 2-3 gallons of isocyanates will remain in the tanks. Under these circumstances Dynasolve Iso-Neutralizer is used to flush out the liquid isocyanate prior to the introduction of Dynasolve CU-6. The Dynasolve CU-6 (or other flushing solvent) will be used to remove the crystallized isocyanate or uncured pre-polymer. In addition to flushing out most of the liquid isocyanate, the Dynasolve Iso-Neutralizer will react with any remaining free isocyanates and inhibit gelling. Caution: Do not take internally. Avoid contact with skin and eyes. Keep away from heat and flame. Wear gloves and safety goggles. Use with adequate ventilation. Please refer to MSDS before use or disposal.
ProductSiteLaunchDate : 2017-05-02T07:00:00.000Z
RecommendedUsesForProduct : Industrial
Size : 4 oz
SpecificUsesForProduct : Prevent Corrosion
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 47131800
Viscosity : SAE 10