Cart 2 india

Specification
Brand : NXUTKBNK
BulletPoint : Power Supply
BulletPoint1 : Industrial Power Supply
BulletPoint2 : HLG-40H-20 40W waterproof LED constant voltage and constant current power supply for PFC street lights
Color : One Color
ExternallyAssignedProductIdentifier : 6411587075444
ItemName : NXUTKBNK HLG-40H-20 40W Waterproof LED Constant Voltage and Constant Current Power Supply for PFC Street Lights
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-power-supply
Manufacturer : NXUTKBNK
ModelName : NXUTKBNK
ModelNumber : NXUTKBNK
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NXUTKBNK
ProductDescription : Industrial Power Supply
HLG-40H-20 40W waterproof LED constant voltage and constant current power supply for PFC street lights
Model: HLG-40H-20
Work efficiency: 86.5
Protection level: IP67
Number of power supply phases: single phase
Power supply type: switching power supply
Full range AC input voltage (up to 305VAC)
Built-in active PFC (power factor correction) function, when the load is greater than or equal to 60%, the power factor is >0.9
Efficiency up to 90%
Fully enclosed aluminum alloy shell with glue potting
With short circuit protection/overcurrent protection/overvoltage protection/overheating protection
Class 2 power supply unit, passed LPS (limited power supply) test
Constant voltage + constant current working mode
DC output range 20V, 0～2.00A
Constant current voltage range 12~20V
Output voltage accuracy ±1.0%
Ripple and noise 150mVp-p
Efficiency 88%
Input voltage range 90～305VAC/127～431VDC
Input surge current cold start, 50A/230V
Voltage setting range 10.8~13.5V (Type A only, adjusted through VoADJ)
Current setting range 2~3.33A (Type A only, adjusted through IoADJ)
Leakage current and overcurrent protection: When the output current reaches 95%~108% of the set current, constant current limit and recovery
When the over-voltage protection output is 15~21V, the output voltage is shut down and restored after restarting.
Overheating protection: shuts off the output voltage at 85℃±10℃ (RTH2) and recovers after restarting
Start-up rising hold time: 1000mA, 80mA, 16mA/230VAC at full load; 1500mA, 80mA, 16mA/115VAC at full load
Insulation characteristics: between input terminal and output terminal: 3.75KVAC, between input terminal and shell: 2KVAC, between output terminal and shell: 0.5KVAC,
Operating temperature -40～+70℃ (see output load derating curve)
Vibration resistance 10～500Hz, 5G12 minutes/cycle, XYZ each axis 72 minutes each
Mean tim
ProductSiteLaunchDate : 2025-05-17T06:56:25.304Z
Size : HLG-40H-20
UnitCount : 1