Cart 2 india

Specification
AgeRangeDescription : adult
Brand : SUNGOOYUE
BulletPoint1 : [Locking Device and Ratchet Stop] Ensure accurate and repeatable readings
BulletPoint2 : [ Machinery Structure] Makes reading more intuitive and convenient
BulletPoint3 : [Clear Marking Line] Allows for easy and convenient reading
BulletPoint4 : [ Alloy Measuring Heads] Ensure internal size measurement with no burrs
BulletPoint5 : [Stainless Steel Body with Chrome Plated Offers durability and wear
Color : One Color
ExternallyAssignedProductIdentifier : 7630708024720
IncludedComponents : No
ItemName : MICROMETER BORE GAUGE FOR INTERNAL DIAMETER MEASUREMENT SUITABLE FOR WORKSHOPS
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : inside-micrometers
Manufacturer : SUNGOOYUE
Material : Stainless Steel
MeasurementAccuracy : 0.1mm
ModelName : Sungooyue05bnv1h23p
ModelNumber : SUNGOOYUE05bnv1h23p
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SUNGOOYUE05bnv1h23p
ProductDescription : [Locking Device and Ratchet Stop] Ensure accurate and repeatable readings
[ Machinery Structure] Makes reading more intuitive and convenient
[Clear Marking Line] Allows for easy and convenient reading
[ Alloy Measuring Heads] Ensure internal size measurement with no burrs
[Stainless Steel Body with Chrome Plated Offers durability and wear resistance

Spec:

Features:
alloy measuring heads can be used for various internal size measurement, fine workmanship and no burr.
Clear marking line for convenient reading.
The main micrometer body is made of stainless steel with chrome plated surface, wear resisting and .
Designed with locking device, machinery structure make it more intuitive and convenient to read.
Built in ratchet stop device ensures accurate repetitive readings.
Specifications:
Type: Inside micrometer
Measuring Range: 5mm~30mm
Material: Stainless steel
: 0.01mm
Weight: 268g(approx.)
Zeroing:
Clean the of measuring anvil heads with a soft cloth, then rotate measuring device to make two measuring . If two zero lines of differential sleeve and fixed barrel do not alignment, use the following two methods to adjust.
Method I, if the error is less than 0.02mm (0.001), use ratchet stop to lock screw tightly, then use wrench to pull fixed barrel till two zero lines alignment.
Method II, if the error is greater than 0.02mm (0.001 ),
Step1, use ratchet stop to lock screw tightly, then use wrench to loosen the ratchet stop and remove differential sleeve.
Step2, re align zero lines of fixed barrel and differential sleeve, then put ratchet stop back on. If necessary, adjust it again using method I.
Note: There is no need to calibrate micrometer during common use. Micrometer only need calibration when it is severely worn.
Package Includes:
1 x Inside
ProductSiteLaunchDate : 2024-07-09T17:31:34.665Z
Size : One Size
UnitCount : 1
UnspscCode : 40142000