Cart 2 india

Specification
Brand : Mitutoyo
BulletPoint1 : Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces
BulletPoint2 : Vernier scale in inch units for taking precise inside dimension (ID) measurements
BulletPoint3 : Includes interchangeable extension rods for a diversified range of measurement
BulletPoint4 : Slow head travel helps provide fine positioning
BulletPoint5 : Solid extension rods help provide durability
ExternallyAssignedProductIdentifier1 : 4946368438375
ExternallyAssignedProductIdentifier2 : 04946368438375
ItemName : Mitutoyo 137-012 Tubular Vernier Inside Micrometer, Extension Rod Type, 2-2.5" Range, 0.001" Graduation, +/-0.00017" Accuracy
ItemPackageDimensions_Height : 10.2 centimeters
ItemPackageDimensions_Length : 2.6 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : inside-micrometers
Manufacturer : Mitutoyo
Material : Stainless Steel
MeasurementAccuracy : +/-0.00017"
ModelNumber : 137-012
NumberOfItems : 1
PartNumber : 137-012
ProductDescription : A Letter To Customer :

Dear customer
Welcome to visit SANURE,a store registered the TOPINCN brand.
Please feel to Add to Cart if you are interest in this item.
Hope you have a good shopping experience here.
And any question please do contact us without hesitation,we are here to support you.
,
sanure
Specifications:
Type: Inside micrometer
Measuring Range: 5mm~30mm
Material: Stainless steel
Precision: 0.01mm
Weight: 268g(approx.)
Zeroing:
Clean the surface of measuring anvil heads with a soft cloth, then rotate measuring device to make two measuring surface contact. If two zero lines of differential sleeve and fixed barrel do not alignment, use the following two methods to adjust.
Method I, if the error is less than 0.02mm (0.001"), use ratchet stop to lock screw tightly, then use wrench to pull fixed barrel till two zero lines alignment.
Method II, if the error is greater than 0.02mm (0.001 "),
Step1, use ratchet stop to lock screw tightly, then use wrench to loosen the ratchet stop  and remove differential sleeve.
Step2, re-align zero lines of fixed barrel and differential sleeve, then put ratchet stop back on. If necessary, adjust it again using method I.
Note: There is no need to calibrate micrometer during common use. Micrometer only need calibration when it is severely worn.
Package Includes:
1 x Inside Micrometer
1 x Wrench
1 x Calibration Ring
1 x Packing Box




ProductSiteLaunchDate : 2010-06-30T08:00:01.000Z
Range : 2-2.5"
Resolution : 0.001"
Size : 2-2.5"
StreetDate : 2017-05-15T00:00:01Z
Style : Vernier
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1