Cart 2 india

Specification
Brand : YY-LC
BulletPoint1 : Material & Size：3/4"head Diameter x 54" Long and 1/4" shank Diameter ,#65 Carbon Steel cutting head with a spring steel shank.The drill bit is of an auger type, with a self-feeding threaded tip followed by the cutting edges and the flutes for chip removal.
BulletPoint2 : Flexibility：lexible auger drill bit has a non-slip three flat grip,it has been heat treated for optimum strength and memory,all will flex to some degree the shorter bits are not as flexible as longer ones
BulletPoint3 : Simple works： hole in top end allows you to pull wire,flexible shaft allows for unique self-feeding drilling and suitable for drilling holes down the length of a wall and through hidden studs, with no damage to wall board, plaster, or any exterior finish
BulletPoint4 : Strength & Durability: our screw point installer bit has ultra-sharp threads which provide better pulling power and faster drilling speeds. It moves quickly through obstructions to easily drill and fish wire through existing walls. RPM rule of thumb: The larger the diameter of the drill bit the slower the RPM (Larger bit grabbing and binding ! Slow it down and try again.)
BulletPoint5 : Guide Ball Kit :When the fixing ring is in the right position (the diameter of the ring will be larger than the drill bit so that it can be easily moved), it can be fixed in this position by using the L-wrench included in the kit.
BulletPoint6 : Applicable Scenario ：the auger drill bit fits most standard size power drills ，suit for walls, kitchen counters, sidewalks, recessed lighting, camera mounts
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 735314934191
ExternallyAssignedProductIdentifier2 : 0735314934191
ExternallyAssignedProductIdentifier3 : 00735314934191
FinishType : Titanium
IncludedComponents : 1 * Flexible Installer Drill Bit , 1 * Guide Ball Kit
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 0.4 inches
ItemDisplayDimensions_Width : 2 inches
ItemName : YY-LC Flexible Drill Bit for Wire Pulling with Guide Ball Kit,3/4 in. x (4.5 FT) 54 in. Long Flex Drill Bits for Wood,Auger Head Installer Drill Bit, Fish Bit for Pulling Wires in Walls
ItemPackageDimensions_Height : 132.08 centimeters
ItemPackageDimensions_Length : 3.81 centimeters
ItemPackageDimensions_Width : 3.81 centimeters
ItemShape : 3/4 In.
ItemTypeKeyword : installer-drill-bits
Manufacturer : YY-LC
Material : Carbon Steel
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 7
PartNumber : YY-LC-drill bit
ProductDescription : `
ProductSiteLaunchDate : 2023-12-28T11:37:29.600Z
Size : 54 in. (4.5 FT)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 27111700