Cart 2 india

Specification
Brand : misswendyfuse
BulletPoint1 : Misswendyfuse 3/4'' wide knit stay interfacing tape is narrow strip of fabric, used to stabilize seams on stretchy knit fabrics, prevents seams from stretching out or becoming misshapen over time.
BulletPoint2 : Fit for light to mid-weight fabrics, It provides a lightweight yet strong solution, avoiding the bulkiness of alternatives like ribbon, without adding bulk or stiffness, ensuring knit garments look great after wear.
BulletPoint3 : Solve common problems of tunneling between the double needle stitchess, and the hem doesn't stretch enough. The stay tape remains soft against the skin, making it suitable for sensitive individuals.
BulletPoint4 : Single side adhesive, It fuses quickly (in under 20 seconds) with a standard iron and adheres well to fabric. use with press close like scrap of muslin, adhered beautifully with steam. It holds up well after multiple washes, maintaining its integrity and staying intact.
BulletPoint5 : This bias cut fusible stay tape comes on a roll, making it easy to store and use. It's particularly useful in shoulder seams、pant hems、neck and areas with wear and tear(like zippers), it also can cover embroidered panel on, soft against the body.
CareInstructions : Machine wash and dry
Collection : FABRIC
Color : White+Black
CompatibleMaterial : Fabric
ExternallyAssignedProductIdentifier1 : 0686585040503
ExternallyAssignedProductIdentifier2 : 686585040503
ItemForm : Bolt Of Fabric
ItemName : Misswendyfuse 3/4''×30yards fusible Knit Stay Tape, Hem stabilizer for Knit Fabric, Single Side Adhesive Knit interfacing, Extremely fine & Stretch (White+Black)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : fabric-interfacing
Manufacturer : Misswendyfuse
Material : Polyester
ModelName : misswendyfuse knit stay tape
ModelNumber : ff0012819
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ff0012819
ProductDescription : Misswendyfuse knit stabilizer/knit stay tape is composed of 90%cottonfabrics10%synthetic fibres,lightweight,soft and stretch,one side with adhesive,The most common sizes are 1/2 inch and 1 inch wide it is used to stabilize seams on stretchy knit fabrics,fit for light to mid-weight fabrics,great for woven, knits,blouses and sheer garments. Misswendyfuse prevents seams from stretching out or becoming misshapen over time.It’s particularly useful in shoulder seams, pant hems,neck and areas with wear and tear (like zippers). To hem knits and make the more finished edge of hem, place Misswendyfuse slightly inside raw edge,Particular attention of putting wrong side down and fusible side up, then sewing as flat as you can, last fold the hem and fuse it. Always test on a sample first and use a press cloth, iron temperature set from 250-280℉ for 8-10 seconds. Embroidery: Misswendyfuse is extremely fine and stretchy of fabric material, Some shirts has embroidered panel on, and it is very itchy against the body, after cover the tape, the embroidery does not scratch. In package it figure out which side was fusible,so it can quick hems on knit fabrics.using a stabilizer should lead to less tunneling especially in lightweight knits. if you have wavy hems,put your iron on a setting that produces steam.hover the iron about 1 inch away from your hem and apply steam.this should relax the fabric back into shape and it should lie flatter. This tape is perfect for stabilizing and sewing hems on knit fabrics. It's a bias tape, so there's a bit of stretch, but it still stabilizes hems for sewing really easily and keeps them from needing extra basting or getting that stretched out, wavy look. One caution if using on a poly knit or other knit that can't take a higher heat or steam setting: you can steam baste the tape or baste it on with a polyester or synthetic setting, but you will need follow up by thread basting it (by machine or hand) to keep it in place if you won't be sewing your hem or other seam right away. If you're working with a knit that can take higher heat and steam, it will adhere without extra basting. How to making hem of T-shirts? Cut off the excess off the shirt and ironed on the stabilizer to the raw edge. Use a press cloth and get the adhesive to melt. After this process, pressed up the hem to the 1 inch width of the hem tape. Then set sewing machine to a stretch stitch and sewed the hem. The stabilizer made it so easy to sew!
ProductSiteLaunchDate : 2025-03-05T06:39:38.956Z
SpecificUsesForProduct1 : Craft
SpecificUsesForProduct2 : Model
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Sewing
UnitCount : 1
UnspscCode : 31201500
Viscosity : High Viscosity
WarrantyDescription : 1 months
WaterResistanceLevel : not_water_resistant
WeaveType : Plain