Cart 2 india

Specification
Brand : Electronics123.com, Inc.
BulletPoint : NEW MODULE MIG100J7CSB1W TOSHIBA IGBT MODULE ORIGINAL
BulletPoint1 : The KTA-224 is a Modbus Slave IO module for interfacing to any PLC or PC using the Modbus protocol. It behaves as a Modbus Slave and Relays, Inputs and Outputs are controlled by writing to and reading from the Coils and Holding Registers.
BulletPoint2 : It can be used for many applications such as controlling lights and sprinkler systems, reading sensors and monitoring switches and other digital signals, or even for industrial control.
BulletPoint3 : The module can connect to a standard RS485 2-wire half duplex network or to a computer via USB. When connected via USB, the module acts as a USB to RS485 converter and multiple IO units (or other Modbus devices) can be connected to the RS485 bus. USB drivers are available for Windows, Mac and Linux.
BulletPoint4 : The user can save a set of output statuses to be loaded when the unit is powered up or reset. A watchdog timer can be configured to reset the unit after a user-definable number of seconds since the last communication from a Modbus master.
BulletPoint5 : Assembled and Tested
ConnectorType : Screw
CurrentRating : 0.5 amps
ExternallyAssignedProductIdentifier1 : 0701748716382
ExternallyAssignedProductIdentifier2 : 701748716382
ItemName : Electronics123.com, Inc. Modbus I/O Module 12VDC Powered
ItemPackageDimensions_Height : 9.6 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 11.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : io-modules
Manufacturer : Electronics123.com, Inc.
Material : Plastic
ModelNumber : AJ65SBTB1-16DT
NationalStockNumber : 5963-01-519-5330
NumberOfItems : 1
PartNumber : FX3S-14MR/ES
ProductDescription : Features:
8 Relay outputs (5A, 250VAC contacts)
4 Opto-Isolated Inputs with counters
3 Analog Inputs (10 bit) jumper-selectable for 0-5V or 0-20mA
4 Input Counters
RS485 or USB (virtual serial port)
Can be used as a USB to RS485 converter
Watchdog Timer resets the unit when communication from the network master is lost
Connections via Pluggable Screw Terminals
1200-38400 Baud Modbus Slave Device

Specifications:
Power Supply Vs and COM:
KTA-224: 9-16V DC (12V Nominal) ~200mA + External 5V drain
KTB-224: 18-32V DC (24V Nominal) ~200mA + External 5V drain
Analog Input ANx:
0-5V: ~500k effective resistance with no jumper installed
0-20mA: ~250 effective resistance with jumper installed
Opto-Isolated Input: 0-30V, ~1k effective resistance
Relay Outputs: SPDT relays rated to 5A (resistive). 250VAC / 30VDC
5V Auxiliary Supply 5V: 200mA

Download data sheet here:
http://electronics123.net/amazon/datasheet/KTA-224%20Modbus%20IO%20Module.pdf
ProductSiteLaunchDate : 2015-01-03T08:00:00.000Z
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 43200000
Voltage : 24 volts