Specification Brand : Teyleten Robot BulletPoint : I/Q module E82ZAFSC100 BulletPoint1 : The module adopts high quality relay, normally open interface maximum load: AC 250V/10A, DC 30V/10A;. BulletPoint2 : The use of chip optocoupler isolation, drive ability, stable performance; trigger current 5mA; BulletPoint3 : The module can be set through the jumper high level or low level trigger; BulletPoint4 : Fault-tolerant design, even if the control line is broken, the relay will not act; BulletPoint5 : Power indicator (green), relay status indicator (red) BulletPoint6 : Interface design humane, all interfaces can be directly connected through the terminal leads, very convenient ExternallyAssignedProductIdentifier1 : 0729503061621 ExternallyAssignedProductIdentifier2 : 729503061621 IncludedComponents : NO ItemName : Teyleten Robot 8 Channel Relay Module with Optocoupler Isolation Support High and Low Level Trigger Expansion Board 5V 1pcs ItemPackageDimensions_Height : 1.5 centimeters ItemPackageDimensions_Length : 10 centimeters ItemPackageDimensions_Width : 8 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : io-modules Manufacturer : Teyleten Robot ModelNumber : LR5-02KTNW NumberOfItems : 1 PackageLevel : unit PartNumber : WZGS_HDN16617 ProductDescription : Two module interface. 1、DC+:Connect the positive pole of the power supply (voltage according to the requirements of the relay) 2、DC-: connected to the negative pole of the power supply 3, IN: can be high or low level control relay suction Relay output: 1、NO:Normally open relay interface, the relay is suspended before the relay is engaged, after the relay is engaged, it is shorted to COM. 2、COM:relay common interface 3、NC:Normally closed relay interface, shorted to COM before the relay is engaged, suspended after the relay is engaged. High and low level trigger selection terminal: 1. Low level trigger when jumper is shorted to LOW. 2. High level trigger when jumper is shorted to HIGH. ProductSiteLaunchDate : 2025-04-14T12:31:53.897Z Style : Modern SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnspscCode : 39122300