Cart 2 india

Specification
Brand : JINBING
BulletPoint : You will receive a 20 yard (720 inch) cut of trim for each unit ordered.
BulletPoint1 : Wide : 2" ( 50mm ) lenght : 10meters （11 yard）.
BulletPoint2 : It is heat transfer vinyl,IRON ON , Not self-adhesive.Easy to apply
BulletPoint3 : Brightness > 400 cd/(lx/㎡) Very bright. Washing times : >20
BulletPoint4 : Material: PES Low elastic ( so not very good fit high elastic fabric )
BulletPoint5 : Heat press 140℃ ~ 160℃,dwell time 10~20s with pressure , Cold Peel​
Color : Silver
CompatibleMaterial : Vinyl
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 790404584526
ExternallyAssignedProductIdentifier2 : 0790404584526
ExternallyAssignedProductIdentifier3 : 00730484170943
FabricType : Yarn
GpsrSafetyAttestation : 1
ItemName : JINBING 2" Safety Silver Reflective Iron on Fabric Clothing Tape Heat Transfer Vinyl Film M60 (2" x 33ft)
ItemPackageDimensions_Height : 7.0104 centimeters
ItemPackageDimensions_Length : 5.588 centimeters
ItemPackageDimensions_Width : 6.8072 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : fabric-iron-on-transfers
Manufacturer : JINBING
Material : wood
Material1 : Vinyl
Material2 : Polyethylene Terephthalate
ModelName : Trim Pom Pom Fringe
ModelNumber : LEA52630
NumberOfBoxes : 1
NumberOfItems : 1
Occasion : Christmas
PartNumber : M60
Pattern : Black 1/2" Fringe
ProductDescription : Attachment Type: Iron On (heat transfer)
Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡ >> Cold Peel​
Daytime Color: Silver
Backing fabric:PET film and hot melt adhesive

Certification:EN ISO 20471, ANSI/ISEA 107-2015
Home Wash Cycles: Up to 50 cycles @60℃ ( 140°F), depends on the condition of substrates and heat transfer operations.
Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali.
Precautions:
1, this heat transfer film is not suitable for nylons or any other water-repellent substrates.
2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses.
3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance.
4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner.
5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance.
If you find that the vinyl can be tear off, maybe the temperature not high enough.Add heat and repeat the ironing

ProductSiteLaunchDate : 2017-11-21T08:00:00.000Z
RecommendedUsesForProduct : Body, Clothing
Size : 2" x 33ft
Style : Pom
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Cloth
TargetAudienceKeyword : Adults
TargetAudienceKeyword1 : Womens
TargetAudienceKeyword2 : Mens
TargetAudienceKeyword3 : Adults
TargetAudienceKeyword4 : Unisex Adult
TargetAudienceKeyword5 : Consumer Audience
UnitCount : 33
UnspscCode : 31201500
UpperTemperatureRating : 160 degrees_celsius
WaterResistanceLevel : not_water_resistant