Cart 2 india

Specification
Brand : Eujgoov
BulletPoint1 : Good Performance: Cordless soldering iron adopts stainless steel hot air head, with large diameter heat dissipation port, which can adjust the flame.
BulletPoint2 : Use Temperature: The flame temperature is up to 1300℃, the soldering iron temperature is up to 450℃, and the use time is up to 50‑80 minutes.
BulletPoint3 : With 2 Tips: Equipped with soldering iron tip and welding tip, suitable for industrial welding, electronic welding and vehicle maintenance, etc.
BulletPoint4 : 4 Functions: Gas soldering iron kit with welding, cutting, fire spraying and hot air blowing functions, stable performance, and has a wide range of applications.
BulletPoint5 : Aluminum Alloy: Made of aluminum alloy material, lightweight and long-lasting, good in heat insulation, and not easy to deform or wear.
ItemName : Butane Soldering Iron Kit Gas Soldering Iron Pen Gas Soldering Iron Kit Aluminum Alloy 4 Functions with 2 Tips
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : soldering-irons
Manufacturer : Eujgoov
ModelName : Eujgoov8vo4qbf2ud
ModelNumber : Eujgoov8vo4qbf2ud
PartNumber : Eujgoov8vo4qbf2ud
ProductDescription : Specification:
Item Type: Gas Soldering Iron Kit
Material: Aluminum Alloy
Filling Capacity: 12ml
Fuel Used: Pure Butane (normal lighter gas)
Temperature: Flame temperature up to 1300℃, soldering iron temperature up to 450℃
Use Time: 50-80 minutes
4 Functions: Soldering, cutting, fire spraying, hot air blowing
Gas Filling:
1. Use excellent gas to fill, and confirm that the switch is turned off, and then inflate at 0FF.
2. Introduce the gas tank into the air hole and press down to inflate.
3. Gas filling can be completed in about 10 seconds. Wait a few minutes for the gas to stabilize before using it.
4. If there is a hissing sound at the tail after the gas is injected, press the air port with the pen tip to eliminate it.
Ignition:
1. Replace the soldering iron tip
2. Push the switch to NO and hear a hissing sound
3. Use an igniter or a lighter to ignite near the connector
4. Burn for 3 seconds after the fire is ignited. When the fire is extinguished, the soldering iron tip will continue to heat.
5. Adjust the size of the flame, the direction of + is large, and the direction of - is small
6. The flame temperature of this product is as high as 1300℃ (the temperature of the soldering iron tip is 450℃). Pay attention to safety when using it. After use, turn off the switch to the OFF position.
7. When using a gas soldering iron, please pay special attention to wait until the flame completely eliminates the object in the soldering iron and turns red before operating. The flame size should not be too large to prolong the life of the soldering iron tip.
8. The length of the flame is about 1.2-2.2cm

PackageList:
1 x Gas Soldering Iron Pen
1 x Soldering Iron Tip
1 x Welding Tip

Note:
Take safety precautions when using it.
ProductSiteLaunchDate : 2025-02-14T10:45:43.418Z
UnspscCode : 23271800