Cart 2 india

Specification
Brand : Gearwell
BulletPoint1 : Fast Heating: Adopt L245 heating core, the maximum power is up to 65W, has good heating and temperature recovery efficiency, large heat capacity value, solder joints of various sizes can easily melting.
BulletPoint2 : Wide Compatibility: Compatible with QC PD fast charging protocols, support DC direct power supply. When using DC mode, the original factory or JBC245 compatible heating core can be used, the heating power can reach more than 150W when the voltage is 20V.
BulletPoint3 : Clear Display: 0.91in organic light emitting diode screen can display rich contents such as temperature gear, set temperature, voltage, heating power, the setting can be easily and quickly finished.
BulletPoint4 : Multi Functions: Built in automatic standby, vibration wake up, automatic shutdown, time, temperature, parameter setting and calibration, and supports Chinese and English switching
BulletPoint5 : Aluminum Alloy Made: The soldering iron is made of aluminum alloy numerical control by sandblasting and anodizing process, not only sturdy, but also has a good feel.
Color : Silver
ItemName : Gearwell Electric Soldering Iron, 65W Portable Soldering Tool, L245 Heating Core, Type C Fast Charging, Digital Solder Iron Station, OC PD Power Support (Silver)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : soldering-irons
Manufacturer : Gearwell
ModelName : Gearwellwog7g14r8d-12
ModelNumber : Gearwellwog7g14r8d-12
PartNumber : Gearwellwog7g14r8d-12
ProductDescription :

Item Type: Electric Soldering Iron
Material: Aluminum Alloy
Power: 65W (using the default L245 heating core)
Temperature Control Range: 0℃ to 480℃
Heating Core: L245, compatible for JBC245 (DC mode is required, and the machine can only be started when the voltage is greater than 20V)
Power Interface: Type C
Fast Charging Protocol: QC PD
Power Supply Range: 9-20V
L245 Heating Core Internal Value: 6.5Ω

Package List：
1 x Electric Soldering Iron1 x Soldering Iron Head
1 x Storage Box

Note:
1. Before use, you must confirm the condition of your charging head. If you can only provide 5V power supply and the charging head do not support PD, please replace the charging head for QC fast charging protocol.
2. Setting method of induced voltage: If the charging head is above 65W, no setting is required.
3. If the power of charging head is insufficient, the default setting of welding pen is inductive 20V. If the charging head does not support it, it will automatically jump to the maximum allowable voltage. If the screen flashes during use, it indicates that the power of the charging head is insufficient and the current limiting function is not supported. At this time, it is necessary to check the range of the output parameters of the charging head. Divide the maximum support voltage by 6.5 to get the current value, if calculated value is lower than current value provided by the corresponding voltage marked on the charging head, it will be set as a trap.
4. Due to the oxidation treatment of CNC shell, there may be small scratches or slight oxidation defects. Please understanding!
5. DC mode refers to the direct use of external DC12V to 20V full power supply to supply power to the welding pen through TYPE C cable, without using the charging head of the fast charging protocol.
6. The default heating core is the customized heating core L245, which can only support 65W at most.

ProductSiteLaunchDate : 2025-03-08T12:48:35.160Z
UnspscCode : 23271800