Cart 2 india

Specification
Brand : Selkirk
BulletPoint1 : Vent termination for a vertical, through-the-roof installation
BulletPoint2 : Designed to prevent rain and snow from entering the vent
BulletPoint3 : Humidity Range: 20-99%RH
BulletPoint4 : Size: 52*43*16mm
BulletPoint5 : Service Attitude: We do our best to provide you with the best quality products and the best shopping experience, if you are not copletely satisfied, please feel free to contact us to communicate
Color : yellow
ExteriorFinish : Plastic
ExternallyAssignedProductIdentifier : 8177196468845
ExternallyAssignedProductIdentifier1 : 0053713030581
ExternallyAssignedProductIdentifier2 : 053713030581
IncludedComponents : see details
ItemName : Selkirk 4" Vertical Pellet Rain Cap
ItemPackageDimensions_Height : 6.2 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 12 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automatic-lawn-irrigation-controllers
Manufacturer : Selkirk
Material : Other
ModelNumber : 624014
MountingType : Tabletop
NumberOfItems : 1
PartNumber : 624014
ProductDescription : Description:
Operating voltage: DC 12V
Control current: 0-10A
Humidity Range: 20-99%RH
Control accuracy: 1% RH
Size: 2.0 x 1.7 x 0.6 inches (52 x 43 x 16 mm); Product Weight: Approx.
Probe can be inserted directly into the soil. Digital display of soil water When the humidity is lower than the set value, start the pump and start watering, and stop watering when the humidity reaches the set level. It is very easy to operate. This is intellectual humanization.
Note:
Follow the wiring diagram provided. You can choose the appropriate wiring method according to the load voltage used.
1. F0 setting to stop the humidification (electromagnetic valve or water pump humidification will not work).
Press the "SET" button to display "F0", press the "SET" button to display the starting humidity, and press the +/-button to "set the humidity value".
2. F1 setting starting humidity (starting the solenoid valve or pump humidity work)
Press +/-key to switch to "F1", press "SET" key to display stopping humidity value, press +/-key to set humidity value 3. F2 Humidity correction
No error is required for normal use. By using multiple modules to correct values at the same time, centralized management operation is easy.

ProductSiteLaunchDate : 2022-04-23T14:33:32.254Z
Style : Modern
UnitCount : 1
UnspscCode : 52000000
ValveType : solenoid valve
Voltage : 12 volts