Cart 2 india

Specification
Brand : Taidacent
BulletPoint : Valves
BulletPoint1 : Welding 5V relay, working voltage is 5V; welding 12V relay, working voltage is 12V
BulletPoint2 : Load: 250V 10A AC or 30V 10A DC (currents below this range can be used);
BulletPoint3 : The soil moisture control threshold can be adjusted through the potentiometer, which can automatically water the vegetable gardens and gardens
BulletPoint4 : With delay function, 3 to 5 seconds, when the humidity is detected in a critical state, the relay will not frequently operate and reset;
BulletPoint5 : Sensitivity can be adjusted, adjust the potentiometer knob clockwise to increase the sensitivity;
Color : Dc 24v
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 9164532353766
ExternallyAssignedProductIdentifier1 : 0795749945292
ExternallyAssignedProductIdentifier2 : 795749945292
FrequencyRange : 60 hertz
InputVoltage : 110 volts
ItemName : Taidacent 5 Pcs Soil Moisture Controller Module Kit Smart Irrigation Controller with Soil Moisture Sensor DIY Electronic Automatic Watering System for Plants (Components + PCB Board)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automatic-lawn-irrigation-controllers
Manufacturer : Taida
Material : Plastic
Material1 : Plastic
Material2 : Metal
Material3 : default
Material4 : default
Material5 : default
Material6 : default
Material7 : default
Material8 : default
Material9 : default
ModelName : BAWAZINA
ModelNumber : BAWAZINA
MountingType : Tabletop
NumberOfItems : 1
PartNumber : BAWAZINA
PowerSourceType : Corded Electric
ProductDescription : Kit parameters:
Working voltage: 5V DC voltage (send is 5V relay)
Tip: Welding 5V relay, working voltage is 5V; welding 12V relay, working voltage is 12V
Load: 250V 10A AC or 30V 10A DC (currents below this range can be used);
Board size: 3.0*7.0cm
Function introduction:
The soil moisture control threshold can be adjusted through the potentiometer, which can automatically water the vegetable gardens and gardens, control the soil moisture of the home flower pots, automatically drain the soil trenches, various electronic games, etc., with high-power relays, which can control high-current equipment It also has a delay function to solve the problem of non-delayed flashing of the critical humidity relay without delay. It is a simple and practical soil humidity control system.
Introduction of the switch function of PCB board:
1. Humidification (watering flowers) function: when the switch pops up, when the soil humidity is lower than the set humidity, the module relay will automatically pull in, start spraying, the pump and other places to do the humidification action, and automatically stop when the set humidity is reached
2. Drainage (drainage) function: when the switch is pressed down, when the soil water flow exceeds the set value, the module relay pulls in and starts the pump to drain the water.
Advantages introduction:
1. With delay function, 3 to 5 seconds, when the humidity is detected in a critical state, the relay will not frequently operate and reset;
2. Sensitivity can be adjusted, adjust the potentiometer knob clockwise to increase the sensitivity;
3. The surface of the sensor is tin plated, which can improve the conductivity and prevent the contact with the soil from rusting easily, extending the service life;
4. The product uses Songle high-quality relays, can withstand a load of 2500W, to meet the requirements of most people;
5. The product has power supply indication and relay pull-i
ProductSiteLaunchDate : 2020-06-17T07:47:50.726Z
Size : Components + PCB board
SpecificationMet1 : CE
SpecificationMet2 : FCC
Style : Garden
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43211511