Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Pepperl + Fuchs
BulletPoint : Isolation
BulletPoint1 : 2-channel isolated barrier
BulletPoint2 : 115 V AC supply
BulletPoint3 : Dry contact or NAMUR inputs
BulletPoint4 : Relay contact output and Line fault detection (LFD)
BulletPoint5 : Reversible mode of operation and Up to SIL 2 acc. to IEC 61508/IEC 61511
Color : 220
Color1 : Grey
Color2 : Black
CompatibleDevices : Laptop
ConnectorType : Screw
CurrentRating : 20 milliamps
DataTransferRate1 : 480 megabits_per_second
DataTransferRate2 : 5 gigabits_per_second
ExternallyAssignedProductIdentifier : 4050143000036
ExternallyAssignedProductIdentifier1 : 738680951731
ExternallyAssignedProductIdentifier2 : 0738680951731
GpsrSafetyAttestation : 1
HardwareInterface1 : usb3.0
HardwareInterface2 : usb
HardwarePlatform : x86_64
IncludedComponents : 1 Analog Signal Isolator
ItemName : PEPPERL & FUCHS KFA5-SR2-EX2.W AMPLIFIER
ItemPackageDimensions_Height : 12.9032 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 12.2936 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : isolation-amplifiers
Manufacturer : Pepperl + Fuchs
Material : copper
Material1 : Plastic
Material2 : Metal
MaximumSupplyVoltage : 12 volts_of_direct_current
MinimumSupplyVoltage : 12 volts_of_direct_current
ModelName : Yosoo Health Gearvepf61ds9i-02
ModelNumber : KFA5-SR2-Ex2.W
MountingType : Freestanding
NumberOfBoxes : 1
NumberOfChannels : 2
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
NumberOfPoles : 2
PackageLevel : unit
PackageTypeName : Bare PCB
PartNumber : 103370
PowerSourceType : Corded Electric
ProductDescription : This isolated barrier is used for intrinsic safety applications. It transfers digital signals (NAMUR sensors/mechanical contacts) from a hazardous area to a safe area. The proximity sensor or switch controls a form C changeover relay contact for the safe area load. The normal output state can be reversed using switches S1 and S2. Switch S3 is used to enable or disable line fault detection of the field circuit. During an error condition, the relays revert to their de-energized state and the LEDs indicate the fault according to NAMUR NE44.
ProductSiteLaunchDate : 2019-11-18T02:27:17.517Z
Size : One in one out 4-20mA to 0-10V
SpecificationMet : Sil 2
SupplierDeclaredDgHzRegulation : not_applicable
SupportedDevicesQuantity : 1
UnitCount : 1
UnspscCode : 52161500
Voltage : 115 volts_of_alternating_current