Cart 2 india

Specification
Brand : Advanced Girl
BulletPoint1 : Fit inside any 70mm jar lids or bottle caps. 70mm equals 2.755 in.
BulletPoint2 : No tools requires - Apply proper pressure and they will stay attached to the jar until they are peeled-off
BulletPoint3 : "Sealed for your protection" written on them, so that your customers know that you care about your product quality.
BulletPoint4 : PS lines are designed to be used as an inner seal to seal solid products, such as dry foods
BulletPoint5 : These liners are NOT recommended for watery liquids like juices & especially essential oils
Color : White
ExternallyAssignedProductIdentifier : 4861823166467
ExternallyAssignedProductIdentifier1 : 0731551979070
ExternallyAssignedProductIdentifier2 : 731551979070
ItemDisplayWeight : 3 ounces
ItemName : Pressure Sensitive Torque Activated Cap Seals Liners - 83mm (3.26") Made in USA - 1000 PCS - for Wide Mouth Glass & Plastic Ball Mason Canning Jars - No Induction Sealer Needed (1000)
ItemPackageDimensions_Height : 2.5 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1000
ItemShape : Round
ItemTypeKeyword : canning-jars
Manufacturer : Rewarding Essentials by SanDaveVA
Material : Glass
ModelNumber : FMSL-70MM-R
NumberOfItems : 1000
NumberOfPieces : 1000
PartNumber : FMSL-70MM
Pattern : solid
ProductDescription : Fit jars or bottles with a 70mm opening. Actual measurement is about 70mm. These are Pressure Sensitive seals (PS Foam Liner) that fit inside the lid of your jar, and when properly applied, will stay attached to the jar until they are peeled off.
The seals have "Sealed for your protection" written on them., so that your customers know that you care about your product quality.

Tips on using the cap liners: These liners are NOT recommended for watery liquids like juices & especially essential oils

Clean the lip of the container with alcohol to ensure there is no oily residue that will prevent the seals from sticking

To use the seals, place them inside the lid with the white side facing out.

Screw the lid on as tightly as you possibly can, and let the container sit for at least 30 min.

Common mistakes to avoid:

Lip of the jar is not clean.

Seal facing the wrong direction when applying.

Not enough pressure is applied when installing the seal.

Not waiting enough time before removing lid.

Over filling containers is another common cause for leakage.

ProductSiteLaunchDate : 2019-02-18T16:00:00.000Z
Size : 70mm
Style : Compact
UnspscCode : 52150000