SpecificationBrand : Advanced Girl
BulletPoint1 : PRESSURE SENSITIVE SEAL LINERS provide an extra level of protection compared to a basic foam liner. The polystyrene white foam coated liner insert seals for jars PREVENT LEAKS and preserve FRESHNESS of your dry or powder products.
BulletPoint2 : SEALING INSERTS provide an actual seal for different canning jars. These jar inner seals are coated with a torque activated coating. They are adhesive to GLASS and PLASTIC jars, and round containers with metal or plastic caps and closures.
BulletPoint3 : 2.09 inches (53 mm) in DIAMETER, these jar sealers are used with any type of jars, jugs, bottles, cans or other round neck containers, which are made of glass or plastic, and measure slightly less than 53 mm in outer diameter neck size.
BulletPoint4 : NUMBER 1 ADVANCED sealing technique used by professionals! NO INDUCTION SEALER or SHRINK BAND NEEDED with these liner seals. NO TOOLS, or heat gun REQUIRED! Just center your seal on the jar apply the cap and wait for 24 hours to adhere.
BulletPoint5 : SEALED FOR YOUR PROTECTION - this press and seal liner, cap sealer, will keep your herbs and spices dry and fresh! This single-use foam seal peels easily from container when needed.
Capacity : 1 pounds
Color : Red
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 082652394614
ExternallyAssignedProductIdentifier2 : 0082652394614
ExternallyAssignedProductIdentifier3 : 00714854102352
ItemName : Pressure Sensitive Torque Activated Seals Cap Liners - 53 mm (2.09") -50 PCS -Made in USA- for Glass & Plastic Bottles & Containers - No Induction Sealer Needed
ItemPackageDimensions_Height : 15.3 centimeters
ItemPackageDimensions_Length : 2.4 centimeters
ItemPackageDimensions_Width : 11.7 centimeters
ItemPackageQuantity : 1
ItemShape : round
ItemTypeKeyword : canning-jars
Manufacturer : Advanced Girl Llc
Material : Plastic
Material1 : Metal
Material2 : Glass
Material3 : Polystyrene
ModelNumber : CN235
NumberOfItems : 24
PartNumber : CN235
ProductDescription : These
polystyrene jar foam liner seals coated with
torque-activated adhesive require no tools and no heat induction equipment.
For proper application consider the following recommendations:
● Make sure your pressure sensitive liner size matches the jar opening.
These 53 mm (2.09 inches) seals are to be used with jars or bottles
that measure slightly less than 53 mm in outer diameter neck size.
● Completely clean the jar top with clean cloth and alcohol to clear of liquid
and/or solids. Center jar seal on top of you plastic or glass jar, and apply. The white
side of the seal shall be facing down, the side with red letters shall be facing up.
● Screw metal or plastic cap on jar. Make sure the liner and cap are tightly secured
on the container.
● Once the cap is applied, it should not be removed for at least 24 hours
to ensure proper adhesion. Although depending on your application, the adhesion
process might take significantly less time.
● Seals can be used with glass and plastic jars and with lined or unlined caps.
These pressure sensitive liners are best for use with powder or dry products.
● Avoid overfilling your containers!
● Once seal is removed, it cannot be reapplied.
● Not suitable for applications containing oil.
ProductSiteLaunchDate : 2019-06-23T07:00:00.000Z
Size : 53 mm
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 50
UnspscCode : 52150000