Cart 2 india

Specification
Brand : SFC TOOLS
BulletPoint1 : Cut circles out of sheet metal.
BulletPoint2 : small circle disc cutter comes with 7 hardened steel punches
BulletPoint3 : Will cut up to 20 gauge metal
BulletPoint4 : Punches 1 each of approximately: 6.33 7.89 9.40 11.17 12.71 14.29 15.82 millimeters
BulletPoint5 : 【Quality Service】If you have any questions, you can contact WANLECY customer service, we will give you a satisfactory answer within 24 hours!
ExternallyAssignedProductIdentifier1 : 0685867885405
ExternallyAssignedProductIdentifier2 : 685867885405
ItemName : Disc Cutter Round Set of 7 - for Jewelry Making - SFC Tools 25-152
ItemPackageDimensions_Height : 2.2 inches
ItemPackageDimensions_Length : 3.2 inches
ItemPackageDimensions_Width : 2.7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : jewelry-sizers-and-mandrels
Manufacturer : SFC Tools
Material : steel
Material1 : Metal
Material2 : Hardened Steel
PartNumber : 25-152
ProductDescription : This small circle disc cutter comes with 7 hardened steel punches ranging from 6.33 - 15.85 mm in width and a square steel disc cutting block. The punches are machined flat and smooth at the cutting end to create perfect circle-shaped blanks every time. They beveled at the other end for use with a heavy mallet or hammer. This round disc cutter will cut up to 20 gauge metal and can be used on a rubber mat or block to ease the cutting process. To use it, remove all punches from the block, and select the size punch you would like. Place your sheet metal in the slot and place your punch, sharp edge against the metal, in the correct slot. Strike the beveled side of the punch with a heavy mallet until it pierces through the sheet metal. Be careful of your fingers and other items on your work surface. We recommend using a brass mallet (1lb. to 2lb. preferred) or dead blow to prevent damage to your disc cutter. You should also use Pro-Cut lube to reduce friction and wear on your punches. IMPORTANT: Always position a shim of the same thickness of the metal being cut directly across from the metal in the disc cutter block. This keeps the plates balanced and helps ensure a nice clean cut. Punches 1 each of approximately: 6.33 7.89 9.40 11.17 12.71 14.29 15.82 millimeters
ProductSiteLaunchDate : 2019-08-24T07:00:00.000Z
TargetAudienceKeyword : Unisex Adult
UnspscCode : 60120000