Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Excellent for drilling on both flat and curved surfaces such as stainless steel and cast Iron.
BulletPoint2 : Straight shank design is more suitable for many electric drills (here is not included).
BulletPoint3 : Sharp and twisted flute will make the drilling be more easy and effortless.
BulletPoint4 : Split Point tip starts on contact to keep the bit from walking for fast accurate holes.
BulletPoint5 : Straight threaded flute, Taper cutting edges and 13.5mm diameter flute. NPT 55 degree taper pipe thread taps.
Color : 24 31
CuttingAngleString : 55 degrees
ExternallyAssignedProductIdentifier1 : 634301939631
ExternallyAssignedProductIdentifier2 : 0634301939631
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Drill Bits
ItemDisplayDimensions_Height : 0.56 inches
ItemDisplayDimensions_Length : 7.25 inches
ItemDisplayDimensions_Width : 2 inches
ItemName : uxcell 11.8mm Dia High Speed Steel HSS-CO Twist Drill Bit and G1/4-19 Four Flutes 13.5mm Dia Piping Thread Tap
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 5.91 inches
ItemPackageQuantity : 2
ItemShape : Straight
ItemTypeKeyword : jobber-drill-bits
Manufacturer : uxcell
Material : High Speed Steel
ModelNumber : f22031800ux0076
NumberOfFlutes : 4
NumberOfItems : 2
NumberOfPieces : 2
PartNumber : f22031800ux0076
ProductDescription : Excellent for drilling on both flat and curved surfaces such as stainless steel and cast Iron.
Straight shank design is more suitable for many electric drills (here is not included).
Sharp and twisted flute will make the drilling be more easy and effortless.
Split Point tip starts on contact to keep the bit from walking for fast accurate holes.
Straight threaded flute, Taper cutting edges and 13.5mm diameter flute. NPT 55 degree taper pipe thread taps.

Features:

Twist Drill Bit
Features : Straight Shank
Material : (High Speed Steel)HSS-CO
Color : Black
Bit Diameter: 11.8mm / 0.47"
Shank Diameter: 11.8mm / 0.47"
Flute Length: 110mm / 4.33"
Total Length: 147mm / 5.79"

Piping Thread Tap
Model : G1/4-19
Flute Diameter : 13.5mm / 0.53"
Flute Teeth Pitch : 19G
Shank Diameter : 9mm / 0.35"
Thread Length : 26mm / 1.02"
Total Length : 65mm / 2.56"
Material : (High Speed Steel)HSS

Package Content:
1 x Twist Drill Bit
1 x Piping Thread Tap


ProductSiteLaunchDate : 2023-02-24T08:10:49.837Z
Size : 4x160mm
Style : Drill
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Cast Iron,Stainless Steel,Steel
UnitCount : 1
UnspscCode : 27111701