Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Specification: Diameter: 6.35mm / 0.25"; Full Length: 55mm / 2.17"; Flute Length: 32mm / 1.26"; Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC
BulletPoint2 : Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc.
BulletPoint3 : For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications
BulletPoint4 : Features: Solid carbide drill bit offers long tool life and faster cutting speeds than other substrates, but is more brittle. Sharp cutting edge, good processing performance. Spiral U-shaped groove, smooth chip removal, not easy to stick to the tool.
BulletPoint5 : Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates. Not suitable for hand drills (hand tools).
CuttingAngleString : 135 degrees
ExternallyAssignedProductIdentifier1 : 045242166770
ExternallyAssignedProductIdentifier2 : 0045242166770
FinishType : Fine Grinding
GpsrSafetyAttestation : 1
IncludedComponents1 : Handtools
IncludedComponents2 : Multitools
IncludedComponents3 : Multitool Accessory
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 6 inches
ItemDisplayDimensions_Width : 2 inches
ItemName : uxcell 6.35mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC
ItemPackageDimensions_Height : 12.3 centimeters
ItemPackageDimensions_Length : 2.7 centimeters
ItemPackageDimensions_Width : 9.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : jobber-drill-bits
Manufacturer : uxcell
Material : Solid Carbide (Tungsten Steel)
ModelNumber : a19120900ux0883
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : a19120900ux0883
ProductDescription : Specification:
Diameter: 6.35mm / 0.25"
Full Length: 55mm / 2.17"
Flute Length: 32mm / 1.26"
Material: Solid Carbide (Tungsten Steel)
Features: Hardened to 50 HRC
Finish: Fine Grinding
Package: 1 Pcs x Solid Carbide Drill Bits

Description:
1. Widely Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber and other similar materials.
2. Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
3. Solid Carbide Tool offers long tool life and faster cutting speeds than other substrates, but is more brittle.
4. Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
5. Adapt to several kinds of cooling conditions, for example oil mist,water,oil,air cooling.
ProductSiteLaunchDate : 2020-03-10T03:00:27.618Z
Size : 6.35mm
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum,Stainless Steel,Copper,Cast Iron,Steel
UnitCount : 1
UnspscCode : 27112800