Cart 2 india

Specification
Brand : Kempston Corporation
BulletPoint1 : Professional Grade
BulletPoint2 : C3 or C4 Premium Carbide
BulletPoint3 : Non-Stick Coating
BulletPoint4 : Anti-Kickback Design
BulletPoint5 : C.N.C. Precision Ground
CutType1 : Carbide-Tipped Cut
CutType2 : Glue Joint Cut
ExternallyAssignedProductIdentifier1 : 687461890083
ExternallyAssignedProductIdentifier2 : 0687461890083
ExternallyAssignedProductIdentifier3 : 00687461890083
ItemName : Kempston KC5120 Router Bit Set, 1/2-Inch Shank, 12-Pieces
ItemPackageDimensions_Height : 5.842 centimeters
ItemPackageDimensions_Length : 26.416 centimeters
ItemPackageDimensions_Width : 17.78 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : joinery-router-bits
Manufacturer : Kempston Corporation
Material : Carbide
ModelNumber : KC5120
NumberOfFlutes : 2
PartNumber : KC5120
ProductDescription : Adjusting the bit according to the thickness of the wood, line up the cut edge of the wood to the center point of the bit. Make the 1st cut face up, then turn the wood upside down to make the reverse matching cut. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2008-02-29T00:00:01-00:00
UnitCount : 1
UnspscCode : 27110000