Specification AgeRangeDescription : adult Brand : Mavaol BulletPoint1 : Diamond Blade: Diamond blade, pointed cutting, unhindered cutting, wear is 50‑80 times that of alloy tools BulletPoint2 : 45#Steel Knife Handle: The knife body adopts 45#steel knife handle, tail is chamfered design, more convenient for clamping and effectively prevents tool breakage BulletPoint3 : Sealing Wax Protection: Cutter head sealing wax protection is strong, beautiful, , and improves durability and service life BulletPoint4 : Application: Used for wood board, silicic board, density board, fold prevention special board, particle board, red wood board, medium fiber board BulletPoint5 : Wide Application: This tenon cutter can be widely used for all fully automated CNC equipment with 12.7mm shank diameter Color : 13mm ExternallyAssignedProductIdentifier : 4957281065838 IncludedComponents : No ItemName : Mavaol Tenon Router Bit Diamond 45# Steel 45 Degree Diamond Tenons Cutter 90 Degree Joint Routers Bits ItemPackageDimensions_Height : 6 centimeters ItemPackageDimensions_Length : 11 centimeters ItemPackageDimensions_Width : 6 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : joinery-router-bits Manufacturer : Mavaol ModelName : 2025 ModelNumber : Mavaolhio1d2m7p8 NumberOfBoxes : 1 NumberOfItems : 1 NumberOfPieces : 1 PartNumber : Mavaolhio1d2m7p8 ProductDescription : Item Type: Tenon Router Bit Blade Material: Diamond Shank Material: 45# Steel Model: 1/2x38xH17.5x2T Shank Diameter: Approx. 12.7mm / 0.50in Diameter: Approx. 38mm / 1.50in Cutting Thickness: Approx. 17.5mm / 0.70in Style: 2T Purpose: For wood board, silicic board, multi layer board, density board, fold prevention special board, particle board, red wood board, MDF Suitable for all fully automated CNC equipment with 12.7mm shank diameter
Package List: 1 x Tenon Router Bit Note: 1. In order to avoid the tool from twisting due to excessive pressure, all tools are designed to rotate clockwise 2. When the tools are finished, all pass the balance test to ensure that there is no doubt about runaway. In order to again ensure that the tools are from swing and runout during use, please pay attention to choosing suitable mechanical equipment and excellent jackets. 3. The jacket must be of a suitable size. If found that the jacket is not round enough or worn, will cause the jacket to not be able to clamp the tool properly and correctly. Please replace a good jacket with standard specifications immediately 4. The installation of the tool shank should be in accordance with EU regulations, such as the clamping depth of the 12.7mm shank diameter must reach 24mm in order to maintain the proper pressure bearing range of the tool shank 5. When the tool is blunt, please replace with a new one, do not continue to use, so as to avoid tool breakage and work injury 6. When using a tool, please select a tool whose blade length is greater than that of the workpiece