Cart 2 india

Specification
Brand : Hilangsan
BulletPoint1 :
BulletPoint2 : ⚡No Need Complex Gas System: This keg tap is simple to operate and doesn't need complicated devices. It can easily dispense your draft beer. The keg pump tap is perfect for dispensing your cold beer at parties, weddings, picnics, family gatherings
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
BulletPoint6 : ✨Reliable Service: We know you deserve the best, and that's why our products and service are second to none. We take responsibility for every item we sell. If you have any questions or problems, please let us know and we will do our utmost to solve the problem for you
Capacity : 10 pounds
CareInstructions : Hand Wash
Color : Black
ExternallyAssignedProductIdentifier1 : 850048395091
ExternallyAssignedProductIdentifier2 : 0850048395091
ExternallyAssignedProductIdentifier3 : 00850048395091
GpsrSafetyAttestation : 1
IncludedComponents : NUT
ItemDisplayWeight : 3.1 pounds
ItemForm : Cylindrical Keg
ItemLength : 5 feet
ItemName : 4” Keg Party Pump Keg Tap, D System Beer Keg Pump for US Sankey, Kegerator Tap Stainless Steel Probe Coupler Beer Tap with Beer Line Faucet Hose Clamps for Homebrew Picnic Parties
ItemPackageDimensions_Height : 24.2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 17.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : beer-kegging-equipment
ItemVolume : 2.5 gallons
Manufacturer : SLLXJAXC
Material : Stainless Steel
ModelName : size barb
ModelNumber : 1/2"Barb
NominalWallThickness : 0.25 inches
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : 1/2"Barb
PowerSourceType : manual
ProductDescription : Tips for Reducing Foam
1. Do not tap the agitated keg. Let your kegs settle wait about two hours.
2. Keep the keg cold. Use an insulated keg bag/bucket filled with ice to keep the beer keg cold.
3. Do not over pump.If the flow of beer slows down, you just need to pump the kegs a few times.
(First cup of beer usually could be foam)

Need Know Before Use
Air is injected into the keg when using the keg pump, the keg needs to finish within 24 hours for the best flavor.

How To Tap A Keg
1.Chill the keg in an insulating bag with ice.
2.Lift the handle of the coupler.
3.Align the coupler lugs with the mouth of the keg and press the coupler down
4.Turn the coupler, until it locks into place.
5.Pull out the handle and push it down.
6.Open the faucet to pour your first beer.(Don’t need to pump before pouring first beer)
7.Pump the tap 1 to 2 times and check the flow rate when the flow is slow.
8.Open faucet all the way when pouring, and first few cups could be foam.

You Will Get
1 × 4" Keg Pump with D-Coupler
1 × 2ft Beer Line
2 × ABS Beer Faucet
2 × Hose Clamp

ProductSiteLaunchDate : 2024-05-22T10:14:48.953Z
Size : 4" keg tap
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 48101700