Cart 2 india

Specification
Brand : BACOENG
BulletPoint1 : Stainless steel probe: The Sankey beer keg connector is composed of a chromed brass body and a stainless steel probe. The stainless steel probe is used to penetrate the beer keg. Beer only contacts the stainless steel part of the connector. At the same time, this material will not wear out over time and can still maintain the flavor of beer after long-term use. It can also provide better service for high-demand commercial environments such as bars, restaurants and breweries.
BulletPoint2 : Professional beer keg connector kit: The beer keg faucet has a G 5/8 thread of the American beer industry standard. This D-type connector has a beer tail piece and is suitable for hoses with a 5/16 inch inner diameter.
BulletPoint3 : Easy to install and lock: Just slide the keg coupler tap in from the side of the keg fitting until fully aligned, then squeeze the handle halves together and push it down to lock. The ergonomic lever handle design allows for smooth operation without the need to pull the handle out.
BulletPoint4 : Safety pressure relief valve: The pressure relief valve of the beer keg connector will automatically open at a pressure of about 53 psi, allowing excessive pressure gas to escape before entering the beer keg. It is equipped with two sets of silicone check valves and beer line gaskets to form a seal between the connector and the tail piece to prevent gas/beer leakage.
BulletPoint5 : Excellent compatibility: This BACOENG beer keg connector is suitable for all American "A" system Sankey beer kegs. It is very suitable for dispensing beer, wine, soda and other carbonated beverages. If you have any questions about the product, please feel free to contact us.
CareInstructions : Dishwasher Safe
Color : Silver
ExternallyAssignedProductIdentifier1 : 752692671890
ExternallyAssignedProductIdentifier2 : 0752692671890
GpsrSafetyAttestation : 1
IncludedComponents : 1
ItemName : BACOENG Keg Coupler, A System Sankey Beer Keg Tap with Stainless Steel Probe, Black Handle & Hose Clamp for 5/16" ID Hose, A Style
ItemPackageDimensions_Height : 15.7988 centimeters
ItemPackageDimensions_Length : 8.7122 centimeters
ItemPackageDimensions_Width : 12.192 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : beer-kegging-equipment
Manufacturer : BACO ENGINEERING
Material : Stainless Steel
ModelName : P0362FUSA
ModelNumber : P0362FUSA
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : P0362FUSA
ProductDescription : BACOENG keg coupler
ProductSiteLaunchDate : 2024-12-31T08:00:00.000Z
Size : small
Style : A System
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 48100000