Cart 2 india

Specification
Brand : Greenlee
BulletPoint1 : Punches up to 10 gauge stainless steel
BulletPoint2 : Punch and draw stud are required for operation
BulletPoint3 : For use with Greenlee punch 04602 and draw studs 31872, 29452, or 30227
BulletPoint4 : Can be used with Greenlee ratchet driver 1904 or hydraulic drivers 7804/7904 and 7646/7625
BulletPoint5 : Unique punch profile also splits slugs for easier slug removal
BulletPoint6 : Auto-Stop Detects Punch Completion And Automatically Stops The Ram, For Longer Tool Life
BulletPoint7 : Gator Eye Compatible - With I-Press Software, Monitor Tool Performance And Set Service Intervals
BulletPoint8 : Over 7 Tons Of Punching Force
Color : Na
Color1 : Black
Color2 : Green
Color3 : Silver
ExternallyAssignedProductIdentifier1 : 783310046011
ExternallyAssignedProductIdentifier2 : 0783310046011
ExternallyAssignedProductIdentifier3 : 00783310046011
FitType : Fitted
GpsrSafetyAttestation : 1
IncludedComponents : 04601
ItemDisplayWeight : 0.05 pounds
ItemName : Greenlee 04601 KNOCKOUT PUNCH DIE
ItemPackageDimensions_Height : 9.652 centimeters
ItemPackageDimensions_Length : 9.398 centimeters
ItemPackageDimensions_Width : 9.652 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-knockout-punches
Manufacturer : Greenlee
Material : See punch specifications.
Material1 : Plastic
Material2 : Alloy Steel
MaximumWeightRecommendation : 0.6 pounds
MeasurementSystem : Inches
ModelName : LS50L2 LS50L2 7-Ton Battery-Hydraulic Knockout Driver (Driver Only)
ModelNumber : 04601
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Hydraulic
PartNumber : 04601
PowerSourceType : AC
ProductDescription : The hydraulic drive draw stud is made of chromium steel with heat treatment, ensuring high hardness, wear-resistant, corrosion-resistant and rust-proof.
A unique punch profile helps split slug for easier removal, increasing work efficiency. Use the die together during operation.
First, open an 11.5mm guide hole, screw in the draw stud in the hole opener, put down the lower die, iron plate, and upper die in sequence, and finally press and open the hole.
It can only be used on metal plates below 4mm; please do not use it without load to avoid high pressure oil pipes bursting due to excessive pressure.
Draw stud is designed for use with the hydraulic knockout punches with the same thread configuration. The punches hole-making kit is perfect for drilling holes in a wide range of materials, such as stainless steel, iron, aluminum, etc.

ProductSiteLaunchDate : 2009-07-27T21:48:07.000-00:00
SheetCount : 1
Size : Replacement Die for ISO 25 Slug-Splitter knockout
SpecificUsesForProduct : Professional
Style : Music
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44101602
WaterResistanceLevel : not_water_resistant