Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint : Punch Unt 2-1/4 Pop
BulletPoint1 : Size - Draw Stud Thread Specifications: M20 x 1.5, M10 x 1, Total Length: 98mm / 3.86", Lock Cap Diameter: 24mm / 0.9", Lock Cap High: 15mm / 0.6", Lock Cap Thread Specification: M10 x 1.
BulletPoint10 : Requires less force than conventional punches Weight 33-Pound
BulletPoint2 : Material - The hydraulic drive draw stud is made of chromium steel with heat treatment, ensuring high hardness, wear-resistant, corrosion-resistant and rust-proof.
BulletPoint3 : Features - A unique punch profile helps split slug for easier removal, increasing work efficiency. Use the die together during operation.
BulletPoint4 : Applications - Draw stud is designed for use with the hydraulic knockout punches with the same thread configuration. The punches hole-making kit is perfect for drilling holes in a wide range of materials, such as stainless steel, iron, aluminum, etc.
BulletPoint5 : Notice - First, open an 11.5mm guide hole, screw in the draw stud in the hole opener, put down the lower die, iron plate, and upper die in sequence, and finally press and open the hole.
BulletPoint6 : Replaces 72BB
BulletPoint7 : Punch holes in 16-Gauge to 10-Gauge stainless steel
BulletPoint8 : Designed to split the slug into two pieces for easy removal
BulletPoint9 : Punches are manufactured from tool steel for high strength and long life
Color : Black
ExternallyAssignedProductIdentifier1 : 783310320135
ExternallyAssignedProductIdentifier2 : 0783310320135
ExternallyAssignedProductIdentifier3 : 00783310087595
ExternallyAssignedProductIdentifier4 : 0811993021343
ExternallyAssignedProductIdentifier5 : 00019019952255
ExternallyAssignedProductIdentifier6 : 00811993021343
GpsrSafetyAttestation : 1
IncludedComponents : 2" conduit size Standard Round knockout punch
ItemDisplayWeight : 33 pounds
ItemName : HARFINGTON Knockout Punch Draw Stud M20 x 1.5 M10 x 1 Thread Replacement Hydraulic Draw Stud with Lock Cap Punches Hole-Making Kit Available for Hydraulic Drivers
ItemPackageDimensions_Height : 2.17 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 2.17 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-knockout-punches
Manufacturer : HARFINGTON
Material : Metal
Material1 : Stainless Steel
Material2 : Iron
ModelName : 154PM Hydrauilic Knockout Set
ModelNumber : hta240128hh000808
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Hydraulic
PackageLevel : unit
PartNumber : hta240128hh000808
ProductDescription : The hydraulic drive draw stud is made of chromium steel with heat treatment, ensuring high hardness, wear-resistant, corrosion-resistant and rust-proof.
A unique punch profile helps split slug for easier removal, increasing work efficiency. Use the die together during operation.
First, open an 11.5mm guide hole, screw in the draw stud in the hole opener, put down the lower die, iron plate, and upper die in sequence, and finally press and open the hole.
It can only be used on metal plates below 4mm; please do not use it without load to avoid high pressure oil pipes bursting due to excessive pressure.
Draw stud is designed for use with the hydraulic knockout punches with the same thread configuration. The punches hole-making kit is perfect for drilling holes in a wide range of materials, such as stainless steel, iron, aluminum, etc.

ProductSiteLaunchDate : 2024-03-12T09:45:50.082Z
SheetCount : 11
Size : 2" Conduit (2.42" or 61.5 mm)
Style : Hydraulic 1/2" to 2"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111500