Cart 2 india

Specification
Brand : ANGGREK
BulletPoint1 : Cold air can provide cooling in harsh industrial environments, allowing continuous and stable
BulletPoint2 : RAPID COOLING: The tube air cooler could generate cold air rapidly and can be quickly adjusted through valve.
BulletPoint3 : ALUMINUM ALLOY BODY: Cold air is made of aluminum alloy, which is , oxidation and high temperature resistant, light and sturdy.
BulletPoint4 : GOOD HEAT DISSIPATION: tube is equipped with aluminum alloy heat sink, with strong heat dissipation and high efficiency.
BulletPoint5 : HIGH SAFETY: The air cooling has no moving parts, no electricity, no chemicals, and no electric sparks, can be used with confidence.
Color : #911
IncludedComponents : No
ItemName : Cold Air, Aluminum Alloy Good Heat Dissipation Cold Air Cooling for Processing
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 27 centimeters
ItemPackageDimensions_Width : 17 centimeters
ItemTypeKeyword : science-lab-coolers
Manufacturer : ANGGREK
ModelName : Anggrekwkq2ory4ih
ModelNumber : ANGGREKwkq2ory4ih
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ANGGREKwkq2ory4ih
ProductDescription : 1. RAPID COOLING: The tube air cooler could generate cold air rapidly and can be quickly adjusted through valve.
2. GOOD HEAT DISSIPATION: tube is equipped with aluminum alloy heat sink, with strong heat dissipation and high efficiency.
3. ALUMINUM ALLOY BODY: Cold air is made of aluminum alloy, which is , oxidation and high temperature resistant, light and sturdy.
4. HIGH SAFETY: The air cooling has no moving parts, no electricity, no chemicals, and no electric sparks, can be used with confidence.
5. Cold air can provide cooling in harsh industrial environments, allowing continuous and stable operation.

Specification:
Item Type: Cold Air Cooling
Material: Aluminum Alloy
Model: TV20015G
Air Pressure: 6.9 Bar
Intake Air Volume: 430L/min (15cfm)
Maximum Cooling Capacity: 1100BTU (300Kcal/Hr)
Type: Aluminum Alloy Heat Sink Type
Inlet Hole: Female Thread G1/4
Cold Air End: Female Thread G3/8

How to Use:
1. The test temperature difference of tube is the limit temperature difference inside the cold air port under standard conditions, and cannot be used as the operating temperature. The specific operating temperature can be adjusted through the internal regulating valve at the hot air end.
Adjustment Method: Unscrew the hot end muffler and rotate the built in regulating valve. The temperature increases clockwise and decreases counterclockwise.
2. When the factory temperature is set to air pressure of 0.69MPa, the temperature difference is ‑25℃, which can be adjusted automatically if lower temperature is required.
Note: The cold air temperature difference of ‑25℃ does not mean that the cold air temperature is ‑25℃ below 0, but refers to the temperature drop.
For example, when the ambient temperature is 25℃, and the temperature difference is ‑25℃, the actual cold air temperature is 0℃.
3.
ProductSiteLaunchDate : 2024-09-04T14:29:34.558Z
UnspscCode : 49121510
Wattage : 70 watts