Cart 2 india

Specification
Brand : BIHYM
BulletPoint1 : HIGH CONVENIENCE LEAD PAINT TEST KIT: Our lead testing swabs are a simple and effective way to test for lead contamination in paint. They are easy to use and can be performed by individuals without any special training
BulletPoint2 : FAST, ACCURATE & COST EFFECTIVE: The lead test swabs provide accurate results in a short amount of time (in just 30 seconds), allowing for quick identification of contaminated areas. They are relatively inexpensive compared to other lead testing methods
BulletPoint3 : EASY TO USE LEAD TEST KITS: Simply dip the swab in the water and clean your testing surface. Rub the swab over the target area. If the swab’s color changes to red, violet, or purple then there is lead present on the surface
BulletPoint4 : SAFER CHOICE: Our lead test kit is a non-toxic, odorless, and stain-free method of collecting samples of lead. There is no need to wear protective gloves during use, and there is no need to store it in a special container. But be careful: not edible, please keep it away from children. Do not touch the tip with your hands after use
BulletPoint5 :
ItemName : Lead Test Kit Swabs - BIHYM Lead Paint Test Kit, Lead Check Swab for Home Use All Painted Surfaces, Dishes, Metal, Wood, Toys, Test Results in 30 Seconds (60PCS)
ItemPackageDimensions_Height : 9.906 centimeters
ItemPackageDimensions_Length : 5.1054 centimeters
ItemPackageDimensions_Width : 5.1054 centimeters
ItemTypeKeyword : science-lab-swabs
Manufacturer : BIHYM
NumberOfBoxes : 1
NumberOfItems : 60
PackageLevel : unit
PartNumber : FCS-01
ProductDescription :

Designed to test surfaces that might be contaminated with lead:

Our lead detection swabs are a reliable and cost-effective way to test for lead contamination in a variety of settings and may be useful for homeowners, building managers, and other individuals concerned about lead exposure.

Key features:

Helps detect the presence of lead-based paint in a home or business

Quick and accurate results in 30 seconds, no waiting

Easy to interpret for the layperson, with color change indicating the presence of lead

Easy to use, non-toxic, cost-effective, and safe choice

Our lead test swabs can be used to test for lead in paint on walls, ceilings, trim, and other painted surfaces in homes, commercial buildings, and industrial settings.

To use lead testing swabs, follow these steps:

1. Clean the surface to be tested with soap and water and allow it to dry completely

2. Open the lead testing swab package and remove the swab

3. Dip the swab in the water

4. Gently rub the swab over the surface to be tested, making sure to cover the entire area

5. If the swab shows a red, violet, or purple color, then lead is present on the surface

ProductSiteLaunchDate : 2023-01-29T16:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 46150000