Cart 2 india

Specification
Brand : LAM-IT-ALL
BulletPoint1 : Quality Lamination Roll Film Used by Commercial Trade Laminating Shops Worldwide
BulletPoint2 : LAM-IT-ALL premium Crystal Clear Glossy Laminating Roll Film
BulletPoint3 : 10.0 mil thick 25” x 100’ on 1” core Roll (250mic thick, 635mm x 30m on 25mm core), Reported to Run Flatter Than Most Other Brands
BulletPoint4 : Capable of Laminating coated and glossy papers as well as those with heavy ink coverage
BulletPoint5 : Bonding Temperature Reported as low as 220 to 250 degrees F means Faster Production and Increased Efficiency
Color : Clear
ItemName : LAM-IT-ALL Low Melt Thermal Roll Lamination Film 25-inch x 100-feet on 1-inch core (4 Rolls) 10.0 Mil Gloss Finish
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 25.5 inches
ItemPackageDimensions_Width : 9 inches
ItemPackageQuantity : 4
ItemTypeKeyword : laminating-supplies
Manufacturer : LAM-IT-ALL
Material : polyester
NumberOfItems : 4
PartNumber : 1C10.0G25X100LMLIA-4
ProductDescription : LAM-IT-ALL low melt thermal laminating roll film on 1" core 25" x 100' x 10.0 mil with glossy finish represents professional quality lamination rolls for all thermal roll laminators including heat shoe and heated roller types that have 1" diameter feed mandrels. Protect and enhance your prints and posters like the professionals do, with low melt laminating film.
Low melt polyester laminate is used primarily for encapsulation and provides excellent adhesion and clarity on coated and glossy papers as well as those with heavy ink coverage. This roll laminate has a special copolymer adhesive which allows the lamination film to seal at a lower temperature than most films. Lower temperature allows the film to bond faster, which means faster production and increased efficiency. Bonding temperature reported at 220 to 250 F.

TIP: The actual temperature required for ANY laminating film varies by laminator type (heated roller vs heat shoe), laminating speed, ambient temperature, type of paper and even the color(s) of the print being laminated.

Polyester PET plastic films resist penetration by chemicals, greases, and oils and are the most commonly used laminate for hot roll laminators, especially when encapsulating paper sheets.
Overall diameter is approximately 4" inches and fits roll laminating machines using 1" diameter feed roll mandrels.

Features:

Low-melt adhesive typically used in commercial and professional trade laminating shops

Crystal Clear Glossy Finish Enhances Images and Print

Capable of Laminating coated and glossy papers as well as those with heavy ink coverage

Retains dimensional stability from -50 degrees F to 350+ degrees F

Common Applications

Menus

Sales Aids

Displays

Wide Format

Arts & Crafts

Charts

Maps

Signs & Notices

Schedule Boards

ProductSiteLaunchDate : 2018-07-22T14:00:00.000Z
Size : 4 Rolls
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44102000