Cart 2 india

Specification
Brand : Oregon Lamination
BulletPoint1 : Pack of 200 heat activated 8.75 x 12.25 inch 3 mil Laminating Pouches sealed on one 8.75” edge including at least 2 silicone coated laminating carriers for laminators that require them.
BulletPoint2 : Made of durable clear polyester plastic with heat activated EVA adhesive which becomes clear when heat and even pressure is applied (thermal laminator recommended)
BulletPoint3 : Maximum insert sheet size recommended is up to 8-1/2” x 12” (216mm x 305mm) to provide a standard 1/8” (3mm) sealed edge border protecting your sheet
BulletPoint4 : These Laminator pouches include small pre-rounded corners for a smooth, safe professional finish
BulletPoint5 : Metric Pouch size: 222mm x 311mm x 75 microns x 2 flaps add 150 microns thickness to your sheet
Color : Clear
CpsiaCautionaryStatement : no_warning_applicable
ItemName : Oregon Lamination Heat Activated Laminating Pouches 8.75 x 12.25 inch 3 mil (222mm x 311mm x 75 microns) [pk of 200] for A4 Size Sheets, Clear Gloss
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 15.38 inches
ItemPackageDimensions_Width : 9.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : laminating-supplies
Manufacturer : Oregon Laminations Company
Material : polyester,plastic,EVA heat activated adhesive
ModelNumber : A403-2
NumberOfItems : 200
PaperSize : A4 inches
PartNumber : A403-2
ProductDescription : All laminating pouches are not the same. Oregon Lamination laminating pouches are manufactured to achieve high clarity with the least defects and clear glossy finish protecting and enhancing colors. Our fresh adhesive may melt faster than others, which means potential faster running times or lower temperatures used and come with a money back performance guarantee.

Heat activated adhesive becomes clear when heat and even pressure is applied.

Compatible with all thermal pouch laminators capable of sealing 3 mil 8-3/4 x 12-1/4 inch laminate (metric 222mm x 311mm x 75 micron x 2 flaps adds 150 microns thickness to your sheet). 3 mil is the thinnest standard laminating pouch thickness available and seals in all pouch laminators capable of heat laminating 3 mil pouches for 6 mil total added to your sheet.

Durable high gloss finish makes colors pop, drawing attention to your printed information.
TYPICAL APPLICATIONS:

A4 size sheets

Advertisements

Notices

S8R & 6PW Photographs

Wet Erase Sheets

Note: Industry standard specification for 3 mil laminating pouches is 3 mil on each flap for a total of 6 mil added to your paper sheet card. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches; however, are sealed on only one edge instead of three (more like a file folder than a pouch, but with a 3/32” flat folded spine).
Laminating Tips:

When trying any brand for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot or too slow.

If planning on trimming or punching laminated sheets, wait 24 to 72 hours for maximum adhesive curing time to get a professional cut edge.
ProductSiteLaunchDate : 2024-03-19T07:00:00.000Z
Size : A4
Style : heat activated
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44102000
WarrantyDescription : Guaranteed to seal using any thermal pouch laminator capable of heat laminating 3 mil pouches for 6 mil total added to your sheet