Cart 2 india

Specification
Brand : Oregon Lamination
BulletPoint : Fellowes C-95 Laminate Jam Free Advance Roller Technology
BulletPoint1 : 3.0 mil thick 12” x 250’ on 2.25” core Roll (75mic thick, 305mm x 76m on 57mm core), Durable School Grade Lamination Film for 2-side (encapsulation)
BulletPoint2 : Standard polyethylene thermal adhesive layer (Food Grade)
BulletPoint3 : Reported to Run Flatter Than Other Brands
BulletPoint4 : Compatible with Wet-Erase Pens for Write-on/Wipe-Off Surface
BulletPoint5 : Economically Priced and Best Suited for Basic Lamination
Color : Clear
CompatibleMaterial : Paper
CustomerPackageType : Frustration-Free Packaging
ExternallyAssignedProductIdentifier : 5706831000664
ExternallyAssignedProductIdentifier1 : 0615311282627
ExternallyAssignedProductIdentifier2 : 615311282627
ExternallyAssignedProductIdentifier3 : 00033816054325
Hazmat : auto-grounding
ItemForm1 : Liquid
ItemForm2 : Paste
ItemName : Oregon Lamination Standard Hot Roll Laminating Film 12-inch x 250-feet on 2-1/4-inch core (4 Rolls) 3.0 Mil Glossy Finish
ItemPackageDimensions_Height : 9.7 inches
ItemPackageDimensions_Length : 12.5 inches
ItemPackageDimensions_Width : 10.2 inches
ItemPackageQuantity : 4
ItemTypeKeyword : laminating-supplies
Manufacturer : Oregon Laminations Company
Material : polyester
ModelNumber : A-12 Pouch
NationalStockNumber : 3590-01-624-9862
NumberOfItems : 4
NumberOfRollers : 2
PackageLevel : unit
PaperSize : A2
PaperSize1 : A4
PaperSize2 : A5
PartNumber : 2C03.0G12X250-OL-4
ProductDescription : Oregon Lamination standard laminating roll film on 2-1/4" core 12" x 250' x 3.0 mil with glossy finish represents quality lamination rolls for thermal laminators.
Overall diameter is approximately 4.4" inches and fits most roll laminating machines on the market using 2-1/4" diameter feed roll mandrels.
This film is polyester based with high-melt food grade adhesive design typically used for two-side laminating and has a standard polyethylene adhesive layer typically wound toward the outside of the roll. Adhesive melting temperature is 280 to 300 degrees F.
Polyester PET plastic films resist penetration by chemicals, greases, and oils and are most commonly used laminate for hot roll laminators, especially when encapsulating paper sheets.
Oregon Lamination standard laminate is designed for laminating plain paper with low ink coverage. Oregon Lamination standard is commonly referred to as a very clear school film.
TIP: The actual temperature required for ANY laminating film varies by laminator type (heated roller vs heat shoe), laminating speed, ambient temperature, type of paper and even the color(s) of the print being laminated.

Enhance your graphics with Oregon Lamination high quality thermal polyester (PET) laminating films.
Features

High melt adhesive design for two-sided laminating (encapsulation) or 1-side

Standard polyethylene (food grade) adhesive layer

Compatible with Wet-Erase Pens for Write-on/Wipe-Off Surface

Economically priced and suitable for basic lamination

Suitable for laminating plain paper with low ink coverage

Retains dimensional stability from -50 degrees F to 350+ degrees F

Resists penetration by chemicals, greases, and oils

Common Applications

Menus

8.5 x 11 sheets

Tab Sheets

Advertising Promotions

Index Cards

Flash Cards

Signs & Notices

Arts and Crafts

ProductSiteLaunchDate : 2018-11-14T00:00:00.000-08:00
Size : 4 rolls
Speed : 4 minutes
StreetDate : 2024-11-28T00:00:01Z
Style : cold seal
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Multiple Surfaces
UnitCount : 1
UnspscCode : 44102000
WarmUpTimeDescription : 3 minute
WarrantyDescription : 1 year
WaterResistanceLevel : not_water_resistant