Cart 2 india

Specification
Brand : Yoidesu
BulletPoint1 : [Versatile Performance] Performs both cold and hot laminating quietly, ideal for various projects at home or in the office.
BulletPoint2 : [Wide Application] Suitable for photos, menus, certificates, and drawings, with user-friendly features for home, school, or office use.
BulletPoint3 : [Improved Efficiency] Preheats in just 2 minutes, laminates at 320mm per minute, enhancing productivity and saving valuable time.
BulletPoint4 : [Easy Release] Innovative abs one touch release key for quick debonding of sheets during lamination, saving time and frustration.
BulletPoint5 : [Flexible Lamination] Accommodates sizes from a4 to 3 inches, compatible with film thicknesses of 80 to 125 microns for various documents.
Color : Aa
CpsiaCautionaryStatement : choking_hazard_small_parts
ExternallyAssignedProductIdentifier : 7622681536123
GemType : No Gemstone
IncludedComponents : pointer stick
ItemDisplayDimensions_Height : 1.18 inches
ItemDisplayDimensions_Length : 13.78 inches
ItemDisplayDimensions_Width : 3.15 inches
ItemDisplayWeight : 0.36 pounds
ItemName : Yoidesu Laminator Machine, Paper Card Lamination Machine A4 to 3 Inch with Paper Cutter, Cold Thermal, Quiet Operation, Fast Speed, for Home, Office (US Plug AC110-120V)
ItemPackageDimensions_Height : 13 centimeters
ItemPackageDimensions_Length : 41 centimeters
ItemPackageDimensions_Width : 17 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : laminators
Manufacturer : Yoidesu
ManufacturerMinimumAge : 36
Material : plastic
MetalType : Stainless Steel
ModelName : Yoidesudr2iefyv16-12
ModelNumber : Yoidesudr2iefyv16-12
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Yoidesudr2iefyv16-12
Pattern : Jewelry Fashion
ProductDescription : Spec:

Item Type: Laminator Machine
Material: ABS
Model: FN336
Power Consumption: 300W
Film Rewind: Push the ABS toggle key to remove the film.
Laminating Size: A4 to 3 Inch
Heating Method: Quartz Heating Wire
Laminating Width: Approx. 230mm / 9.06in (A4)
Laminating Thickness: Approx. 0.1-0.5mm / 0.004-0.02in
Preheating Time: 1-2min
Temperature Range: 115℃-145℃
Lamination Speed: 320mm/min
Noise Level: ≤55db
How To Use:
Non stick paper, foggy white pieces.
1. Not complete the preheating, the temperature is not enough, wait for the over-molding machine to complete the preheating (green light) and then used
2. Thickness gear is not correct, select a higher gear, warming ready to be molded again.
No working or heating of the overmolding machine.
1. The power supply is not suitable, please check the power supply specification before powering on the over machine.
2. The switch is not set to on or hot mode, set the switch to on or hot mode.
Bubbles, wrinkles, bent photos
1. Incorrect thickness gear, select a lower gear, cool down the temperature and get ready before molding.
2. The rubber rollers of the plasticizer are not flat and there are debris, check the rubber rollers and clean them.
3. Plasticized objects are not placed on the level, there are debris, plasticizing before removing debris, put the objects on the level and then plasticized!
What should I do if there is a paper jam in the plasticizer?
1. Not correctly feed the paper, the rubber rollers on the foreign body, switch off and hold down the ABS key for the film, clean the rubber rollers
Smoke over the plastic machine.
1. Normal vulcanization of the new machine imagined, a normal phenomenon of the new machine, more than a few times will disappear!
2. Power supply voltage does not match
ProductSiteLaunchDate : 2024-10-30T06:47:55.395Z
Size : US Plug AC110-120V
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : adults
TargetAudienceKeyword2 : adults
TargetAudienceKeyword3 : adults
UnitCount : 1
UnspscCode : 44102801
WarrantyDescription : Manufacturer warranty for 90 day